--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/freshclam.conf	Sat Dec 26 20:26:22 2015 +0000
@@ -0,0 +1,230 @@
+##
+## Example config file for freshclam
+## Please read the freshclam.conf(5) manual before editing this file.
+##
+
+
+# Path to the database directory.
+# WARNING: It must match clamd.conf's directive!
+# Default: hardcoded (depends on installation options)
+#DatabaseDirectory /var/lib/clamav
+
+# Path to the log file (make sure it has proper permissions)
+# Default: disabled
+#UpdateLogFile /var/log/freshclam.log
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
+# log rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+#LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+#LogTime yes
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Use system logger (can work together with UpdateLogFile).
+# Default: no
+LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# This option allows you to save the process identifier of the daemon
+# Default: disabled
+#PidFile /var/run/freshclam.pid
+
+# By default when started freshclam drops privileges and switches to the
+# "clamav" user. This directive allows you to change the database owner.
+# Default: clamav (may depend on installation options)
+#DatabaseOwner clamupdate
+
+# Initialize supplementary group access (freshclam must be started by root).
+# Default: no
+#AllowSupplementaryGroups yes
+
+# Use DNS to verify virus database version. Freshclam uses DNS TXT records
+# to verify database and software versions. With this directive you can change
+# the database verification domain.
+# WARNING: Do not touch it unless you're configuring freshclam to use your
+# own database verification domain.
+# Default: current.cvd.clamav.net
+#DNSDatabaseInfo current.cvd.clamav.net
+
+# Uncomment the following line and replace XY with your country
+# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
+# You can use db.XY.ipv6.clamav.net for IPv6 connections.
+#DatabaseMirror db.XY.clamav.net
+
+# database.clamav.net is a round-robin record which points to our most 
+# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is 
+# not working. DO NOT TOUCH the following line unless you know what you
+# are doing.
+DatabaseMirror database.clamav.net
+
+# How many attempts to make before giving up.
+# Default: 3 (per mirror)
+#MaxAttempts 5
+
+# With this option you can control scripted updates. It's highly recommended
+# to keep it enabled.
+# Default: yes
+#ScriptedUpdates yes
+
+# By default freshclam will keep the local databases (.cld) uncompressed to
+# make their handling faster. With this option you can enable the compression;
+# the change will take effect with the next database update.
+# Default: no
+#CompressLocalDatabase no
+
+# With this option you can provide custom sources (http:// or file://) for
+# database files. This option can be used multiple times.
+# Default: no custom URLs
+#DatabaseCustomURL http://myserver.com/mysigs.ndb
+#DatabaseCustomURL file:///mnt/nfs/local.hdb
+
+# This option allows you to easily point freshclam to private mirrors.
+# If PrivateMirror is set, freshclam does not attempt to use DNS
+# to determine whether its databases are out-of-date, instead it will
+# use the If-Modified-Since request or directly check the headers of the
+# remote database files. For each database, freshclam first attempts
+# to download the CLD file. If that fails, it tries to download the
+# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
+# and ScriptedUpdates. It can be used multiple times to provide
+# fall-back mirrors.
+# Default: disabled
+#PrivateMirror mirror1.mynetwork.com
+#PrivateMirror mirror2.mynetwork.com
+
+# Number of database checks per day.
+# Default: 12 (every two hours)
+#Checks 24
+
+# Proxy settings
+# Default: disabled
+#HTTPProxyServer myproxy.com
+#HTTPProxyPort 1234
+#HTTPProxyUsername myusername
+#HTTPProxyPassword mypass
+
+# If your servers are behind a firewall/proxy which applies User-Agent
+# filtering you can use this option to force the use of a different
+# User-Agent header.
+# Default: clamav/version_number
+#HTTPUserAgent SomeUserAgentIdString
+
+# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
+# multi-homed systems.
+# Default: Use OS'es default outgoing IP address.
+#LocalIPAddress aaa.bbb.ccc.ddd
+
+# Send the RELOAD command to clamd.
+# Default: no
+#NotifyClamd /path/to/clamd.conf
+
+# Run command after successful database update.
+# Default: disabled
+#OnUpdateExecute command
+
+# Run command when database update process fails.
+# Default: disabled
+#OnErrorExecute command
+
+# Run command when freshclam reports outdated version.
+# In the command string %v will be replaced by the new version number.
+# Default: disabled
+#OnOutdatedExecute command
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Timeout in seconds when connecting to database server.
+# Default: 30
+#ConnectTimeout 60
+
+# Timeout in seconds when reading from database server.
+# Default: 30
+#ReceiveTimeout 60
+
+# With this option enabled, freshclam will attempt to load new
+# databases into memory to make sure they are properly handled
+# by libclamav before replacing the old ones.
+# Default: yes
+#TestDatabases yes
+
+# When enabled freshclam will submit statistics to the ClamAV Project about
+# the latest virus detections in your environment. The ClamAV maintainers
+# will then use this data to determine what types of malware are the most
+# detected in the field and in what geographic area they are.
+# Freshclam will connect to clamd in order to get recent statistics.
+# Default: no
+#SubmitDetectionStats /path/to/clamd.conf
+
+# Country of origin of malware/detection statistics (for statistical
+# purposes only). The statistics collector at ClamAV.net will look up
+# your IP address to determine the geographical origin of the malware
+# reported by your installation. If this installation is mainly used to
+# scan data which comes from a different location, please enable this
+# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
+# of the country of origin.
+# Default: disabled
+#DetectionStatsCountry country-code
+
+# This option enables support for our "Personal Statistics" service. 
+# When this option is enabled, the information on malware detected by
+# your clamd installation is made available to you through our website.
+# To get your HostID, log on http://www.stats.clamav.net and add a new
+# host to your host list. Once you have the HostID, uncomment this option
+# and paste the HostID here. As soon as your freshclam starts submitting
+# information to our stats collecting service, you will be able to view
+# the statistics of this clamd installation by logging into
+# http://www.stats.clamav.net with the same credentials you used to
+# generate the HostID. For more information refer to:
+# http://www.clamav.net/documentation.html#cctts 
+# This feature requires SubmitDetectionStats to be enabled.
+# Default: disabled
+#DetectionStatsHostID unique-id
+
+# This option enables support for Google Safe Browsing. When activated for
+# the first time, freshclam will download a new database file (safebrowsing.cvd)
+# which will be automatically loaded by clamd and clamscan during the next
+# reload, provided that the heuristic phishing detection is turned on. This
+# database includes information about websites that may be phishing sites or
+# possible sources of malware. When using this option, it's mandatory to run
+# freshclam at least every 30 minutes.
+# Freshclam uses the ClamAV's mirror infrastructure to distribute the
+# database and its updates but all the contents are provided under Google's
+# terms of use. See http://www.google.com/transparencyreport/safebrowsing
+# and http://www.clamav.net/documentation.html#safebrowsing 
+# for more information.
+# Default: disabled
+#SafeBrowsing yes
+
+# This option enables downloading of bytecode.cvd, which includes additional
+# detection mechanisms and improvements to the ClamAV engine.
+# Default: enabled
+#Bytecode yes
+
+# Download an additional 3rd party signature database distributed through
+# the ClamAV mirrors. 
+# This option can be used multiple times.
+#ExtraDatabase dbname1
+#ExtraDatabase dbname2