#
# This is the Apache server configuration file providing SSL support using.
# the mod_nss plugin.  It contains the configuration directives to instruct
# the server how to serve pages over an https connection.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#

#LoadModule nss_module modules/libmodnss.so

#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:8443" and "Listen 0.0.0.0:443"
#
Listen 8443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#
#   Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
<% if @passwd_file -%>
NSSPassPhraseDialog  "file:<%= @passwd_file %>"
<% else -%>
NSSPassPhraseDialog  builtin
<% end -%>

#   Pass Phrase Helper:
#   This helper program stores the token password pins between
#   restarts of Apache.
NSSPassPhraseHelper /usr/sbin/nss_pcache

#   Configure the SSL Session Cache.
#   NSSSessionCacheSize is the number of entries in the cache.
#   NSSSessionCacheTimeout is the SSL2 session timeout (in seconds).
#   NSSSession3CacheTimeout is the SSL3/TLS session timeout (in seconds).
NSSSessionCacheSize 10000
NSSSessionCacheTimeout 100
NSSSession3CacheTimeout 86400

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. Those platforms usually also provide a non-blocking
# device, /dev/urandom, which may be used instead.
#
# This does not support seeding the RNG with each connection.

NSSRandomSeed startup builtin
#NSSRandomSeed startup file:/dev/random  512
#NSSRandomSeed startup file:/dev/urandom 512

#
# TLS Negotiation configuration under RFC 5746
#
# Only renegotiate if the peer's hello bears the TLS renegotiation_info
# extension. Default off.
NSSRenegotiation off

# Peer must send Signaling Cipher Suite Value (SCSV) or
# Renegotiation Info (RI) extension in ALL handshakes.  Default: off
NSSRequireSafeNegotiation off

##
## SSL Virtual Host Context
##

<VirtualHost _default_:8443>

#   General setup for the virtual host
#DocumentRoot "/etc/httpd/htdocs"
#ServerName www.example.com:8443
#ServerAdmin you@example.com

# mod_nss can log to separate log files, you can choose to do that if you'd like
# LogLevel is not inherited from httpd.conf.
ErrorLog "<%= @error_log %>"
TransferLog "<%= @transfer_log %>"
LogLevel warn

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
NSSEngine on

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_nss documentation for a complete list.

# SSL 3 ciphers. SSL 2 is disabled by default.
NSSCipherSuite +rsa_rc4_128_md5,+rsa_rc4_128_sha,+rsa_3des_sha,-rsa_des_sha,-rsa_rc4_40_md5,-rsa_rc2_40_md5,-rsa_null_md5,-rsa_null_sha,+fips_3des_sha,-fips_des_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-rsa_des_56_sha,-rsa_rc4_56_sha,+rsa_aes_128_sha,+rsa_aes_256_sha

# SSL 3 ciphers + ECC ciphers. SSL 2 is disabled by default.
#
# Comment out the NSSCipherSuite line above and use the one below if you have
# ECC enabled NSS and mod_nss and want to use Elliptical Curve Cryptography
#NSSCipherSuite +rsa_rc4_128_md5,+rsa_rc4_128_sha,+rsa_3des_sha,-rsa_des_sha,-rsa_rc4_40_md5,-rsa_rc2_40_md5,-rsa_null_md5,-rsa_null_sha,+fips_3des_sha,-fips_des_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-rsa_des_56_sha,-rsa_rc4_56_sha,+rsa_aes_128_sha,+rsa_aes_256_sha,-ecdh_ecdsa_null_sha,+ecdh_ecdsa_rc4_128_sha,+ecdh_ecdsa_3des_sha,+ecdh_ecdsa_aes_128_sha,+ecdh_ecdsa_aes_256_sha,-ecdhe_ecdsa_null_sha,+ecdhe_ecdsa_rc4_128_sha,+ecdhe_ecdsa_3des_sha,+ecdhe_ecdsa_aes_128_sha,+ecdhe_ecdsa_aes_256_sha,-ecdh_rsa_null_sha,+ecdh_rsa_128_sha,+ecdh_rsa_3des_sha,+ecdh_rsa_aes_128_sha,+ecdh_rsa_aes_256_sha,-echde_rsa_null,+ecdhe_rsa_rc4_128_sha,+ecdhe_rsa_3des_sha,+ecdhe_rsa_aes_128_sha,+ecdhe_rsa_aes_256_sha

#   SSL Protocol:
#   Cryptographic protocols that provide communication security.
#   NSS handles the specified protocols as "ranges", and automatically
#   negotiates the use of the strongest protocol for a connection starting
#   with the maximum specified protocol and downgrading as necessary to the
#   minimum specified protocol that can be used between two processes.
#   Since all protocol ranges are completely inclusive, and no protocol in the
#   middle of a range may be excluded, the entry "NSSProtocol SSLv3,TLSv1.1"
#   is identical to the entry "NSSProtocol SSLv3,TLSv1.0,TLSv1.1".
NSSProtocol SSLv3,TLSv1.0,TLSv1.1

#   SSL Certificate Nickname:
#   The nickname of the RSA server certificate you are going to use.
NSSNickname Server-Cert

#   SSL Certificate Nickname:
#   The nickname of the ECC server certificate you are going to use, if you
#   have an ECC-enabled version of NSS and mod_nss
#NSSECCNickname Server-Cert-ecc

#   Server Certificate Database:
#   The NSS security database directory that holds the certificates and
#   keys. The database consists of 3 files: cert8.db, key3.db and secmod.db.
#   Provide the directory that these files exist.
NSSCertificateDatabase "<%= @httpd_dir -%>/alias"

#   Database Prefix:
#   In order to be able to store multiple NSS databases in one directory
#   they need unique names. This option sets the database prefix used for
#   cert8.db and key3.db.
#NSSDBPrefix my-prefix-

#   Client Authentication (Type):
#   Client certificate verification type.  Types are none, optional and
#   require.
#NSSVerifyClient none

#
#   Online Certificate Status Protocol (OCSP).
#   Verify that certificates have not been revoked before accepting them.
#NSSOCSP off

#
#   Use a default OCSP responder. If enabled this will be used regardless
#   of whether one is included in a client certificate. Note that the
#   server certificate is verified during startup.
#
#   NSSOCSPDefaultURL defines the service URL of the OCSP responder
#   NSSOCSPDefaultName is the nickname of the certificate to trust to
#       sign the OCSP responses.
#NSSOCSPDefaultResponder on
#NSSOCSPDefaultURL http://example.com/ocsp/status
#NSSOCSPDefaultName ocsp-nickname

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_nss documentation
#   for more details.
#<Location />
#NSSRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "NSSRequireSSL" or "NSSRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context.
#NSSOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php3?)$">
    NSSOptions +StdEnvVars
</FilesMatch>
<Directory "/var/www/cgi-bin">
    NSSOptions +StdEnvVars
</Directory>

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
#CustomLog /home/rcrit/redhat/apache/logs/ssl_request_log \
#          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>