--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/CHANGELOG.md	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,533 @@
+##2015-05-19 - Supported Release 1.6.0
+###Summary
+
+This release includes support for TEE, MSS, the time ipt module, Debian 8 support, and a number of test fixes and other improvements.
+
+####Features
+- Add TEE support
+- Add MSS support (including clamp-mss-to-pmtu support)
+- Add support for the time ipt module (-m time)
+- Add support for Debian 8
+- Add support for ICMPv6 types 'neighbour-{solicitation,advertisement}'
+- Add support for ICMPv6 type 'too-big'
+- Add support for new 'match_mark' property
+- Added 'ipv4' and 'ipv6' options to 'proto' property
+
+####Bugfixes
+- Fix for Systemd-based OSes where systemd needs restarted before being able to pick up new services (MODULES-1984)
+- Arch Linux package management fix
+
+##2015-03-31 - Supported Release 1.5.0
+###Summary
+
+This release includes physdev_is_bridged support, checksum_fill support, basic Gentoo compatibility, and a number of test fixes and improvements.
+
+####Features
+- Add `physdev_is_bridged` support
+- Add `checksum_fill` support
+- Add basic Gentoo compatibility (unsupported)
+
+####Bugfixes
+- Implementation for resource map munging to allow a single ipt module to be used multiple times in a single rule on older versions of iptables (MODULES-1808)
+- Test fixes
+
+##2015-01-27 - Supported Release 1.4.0
+###Summary
+
+This release includes physdev support, the ability to look up usernames from uuid, and a number of bugfixes
+
+####Features
+- Add `netmap` feature
+- Add `physdev` support
+- Add ability to look up username from uuid (MODULES-753, MODULES-1688)
+
+####Bugfixes
+- Sync iptables/ip6tables providers (MODULES-1612)
+- Fix package names for Amazon and Ubuntu 14.10 (MODULES-1029)
+- Fix overly aggressive gsub when `ensure => absent` (MODULES-1453)
+- Unable to parse `-m (tcp|udp)` rules (MODULES-1552)
+- Fix ip6tables provider when `iptables-ipv6` package isn't installed for EL6 (MODULES-633)
+- Test fixes
+
+##2014-12-16 - Supported Release 1.3.0
+###Summary
+
+This release includes a number of bugfixes and features, including fixing `tcp_flags` support, and added support for interface aliases, negation for iniface and outiface, and extra configurability for packages and service names.
+
+####Features
+- Add support for interface aliases (eth0:0) (MODULES-1469)
+- Add negation for iniface, outiface (MODULES-1470)
+- Make package and service names configurable (MODULES-1309)
+
+####Bugfixes
+- Fix test regexes for EL5 (MODULES-1565)
+- Fix `tcp_flags` support for ip6tables (MODULES-556)
+- Don't arbitrarily limit `set_mark` for certain chains
+
+##2014-11-04 - Supported Release 1.2.0
+###Summary
+
+This release has a number of new features and bugfixes, including rule inversion, future parser support, improved EL7 support, and the ability to purge ip6tables rules.
+
+####Features
+- Documentation updates!
+- Test updates!
+- Add ipset support
+- Enable rule inversion
+- Future parser support
+- Improved support for EL7
+- Support netfilter-persistent
+- Add support for statistics module
+- Add support for mac address source rules
+- Add cbt protocol
+
+####Bugfixes
+- Incorrect use of `source => :iptables` in the ip6tables provider was making it impossible to purge ip6tables rules (MODULES-41)
+- Don't require `toports` when `jump => 'REDIRECT'` (MODULES-1086)
+- Don't limit which chains iniface and outiface parameters can be used in
+- Don't fail on rules added with ipsec/strongswan (MODULES-796)
+
+##2014-07-08 - Supported Release 1.1.3
+###Summary
+This is a supported release with test coverage enhancements.
+
+####Bugfixes
+- Confine to supported kernels
+
+##2014-06-04 - Release 1.1.2
+###Summary
+
+This is a release of the code previously released as 1.1.1, with updated metadata.
+
+## 2014-05-16 Release 1.1.1
+###Summary
+
+This release reverts the alphabetical ordering of 1.1.0.  We found this caused
+a regression in the Openstack modules so in the interest of safety we have
+removed this for now.
+
+## 2014-05-13 Release 1.1.0
+###Summary
+
+This release has a significant change from previous releases; we now apply the
+firewall resources alphabetically by default, removing the need to create pre
+and post classes just to enforce ordering.  It only effects default ordering
+and further information can be found in the README about this.  Please test
+this in development before rolling into production out of an abundance of
+caution.
+
+We've also added `mask` which is required for --recent in recent (no pun
+intended) versions of iptables, as well as connlimit and connmark.  This
+release has been validated against Ubuntu 14.04 and RHEL7 and should be fully
+working on those platforms.
+
+####Features
+
+- Apply firewall resources alphabetically. 
+- Add support for connlimit and connmark.
+- Add `mask` as a parameter. (Used exclusively with the recent parameter).
+
+####Bugfixes
+
+- Add systemd support for RHEL7.
+- Replace &&'s with the correct and in manifests.
+- Fix tests on Trusty and RHEL7
+- Fix for Fedora Rawhide.
+- Fix boolean flag tests.
+- Fix DNAT->SNAT typo in an error message.
+
+####Known Bugs
+
+* For Oracle, the `owner` and `socket` parameters require a workaround to function. Please see the Limitations section of the README.
+
+
+## 2014-03-04 Supported Release 1.0.2
+###Summary
+
+This is a supported release.  This release removes a testing symlink that can
+cause trouble on systems where /var is on a seperate filesystem from the
+modulepath.
+
+####Features
+####Bugfixes
+####Known Bugs
+
+* For Oracle, the `owner` and `socket` parameters require a workaround to function. Please see the Limitations section of the README.
+
+### Supported release - 2014-03-04 1.0.1
+
+####Summary
+
+An important bugfix was made to the offset calculation for unmanaged rules
+to handle rules with 9000+ in the name.
+
+####Features
+
+####Bugfixes
+- Offset calculations assumed unmanaged rules were numbered 9000+.
+- Gracefully fail to manage ip6tables on iptables 1.3.x
+
+####Known Bugs
+
+* For Oracle, the `owner` and `socket` parameters require a workaround to function. Please see the Limitations section of the README.
+
+---
+### 1.0.0 - 2014-02-11
+
+No changes, just renumbering to 1.0.0.
+
+---
+### 0.5.0 - 2014-02-10
+
+##### Summary:
+This is a bigger release that brings in "recent" connection limiting (think
+"port knocking"), firewall chain purging on a per-chain/per-table basis, and
+support for a few other use cases. This release also fixes a major bug which
+could cause modifications to the wrong rules when unmanaged rules are present.
+
+##### New Features:
+* Add "recent" limiting via parameters `rdest`, `reap`, `recent`, `rhitcount`,
+  `rname`, `rseconds`, `rsource`, and `rttl`
+* Add negation support for source and destination
+* Add per-chain/table purging support to `firewallchain`
+* IPv4 specific
+  * Add random port forwarding support
+  * Add ipsec policy matching via `ipsec_dir` and `ipsec_policy`
+* IPv6 specific
+  * Add support for hop limiting via `hop_limit` parameter
+  * Add fragmentation matchers via `ishasmorefrags`, `islastfrag`, and `isfirstfrag`
+  * Add support for conntrack stateful firewall matching via `ctstate`
+
+##### Bugfixes:
+- Boolean fixups allowing false values
+- Better detection of unmanaged rules
+- Fix multiport rule detection
+- Fix sport/dport rule detection
+- Make INPUT, OUTPUT, and FORWARD not autorequired for firewall chain filter
+- Allow INPUT with the nat table
+- Fix `src_range` & `dst_range` order detection
+- Documentation clarifications
+- Fixes to spec tests
+
+---------------------------------------
+
+### 0.4.2 - 2013-09-10
+
+Another attempt to fix the packaging issue.  We think we understand exactly
+what is failing and this should work properly for the first time.
+
+---------------------------------------
+
+### 0.4.1 - 2013-08-09
+
+Bugfix release to fix a packaging issue that may have caused puppet module
+install commands to fail.
+
+---------------------------------------
+
+### 0.4.0 - 2013-07-11
+
+This release adds support for address type, src/dest ip ranges, and adds
+additional testing and bugfixes.
+
+#### Features
+* Add `src_type` and `dst_type` attributes (Nick Stenning)
+* Add `src_range` and `dst_range` attributes (Lei Zhang)
+* Add SL and SLC operatingsystems as supported (Steve Traylen)
+
+#### Bugfixes
+* Fix parser for bursts other than 5 (Chris Rutter)
+* Fix parser for -f in --comment (Georg Koester)
+* Add doc headers to class files (Dan Carley)
+* Fix lint warnings/errors (Wolf Noble)
+
+---------------------------------------
+
+### 0.3.1 - 2013/6/10
+
+This minor release provides some bugfixes and additional tests.
+
+#### Changes
+
+* Update tests for rspec-system-puppet 2 (Ken Barber)
+* Update rspec-system tests for rspec-system-puppet 1.5 (Ken Barber)
+* Ensure all services have 'hasstatus => true' for Puppet 2.6 (Ken Barber)
+* Accept pre-existing rule with invalid name (Joe Julian)
+* Swap log_prefix and log_level order to match the way it's saved (Ken Barber)
+* Fix log test to replicate bug #182 (Ken Barber)
+* Split argments while maintaining quoted strings (Joe Julian)
+* Add more log param tests (Ken Barber)
+* Add extra tests for logging parameters (Ken Barber)
+* Clarify OS support (Ken Barber)
+
+---------------------------------------
+
+### 0.3.0 - 2013/4/25
+
+This release introduces support for Arch Linux and extends support for Fedora 15 and up. There are also lots of bugs fixed and improved testing to prevent regressions.
+
+##### Changes
+
+* Fix error reporting for insane hostnames (Tomas Doran)
+* Support systemd on Fedora 15 and up (Eduardo Gutierrez)
+* Move examples to docs (Ken Barber)
+* Add support for Arch Linux platform (Ingmar Steen)
+* Add match rule for fragments (Georg Koester)
+* Fix boolean rules being recognized as changed (Georg Koester)
+* Same rules now get deleted (Anastasis Andronidis)
+* Socket params test (Ken Barber)
+* Ensure parameter can disable firewall (Marc Tardif)
+
+---------------------------------------
+
+### 0.2.1 - 2012/3/13
+
+This maintenance release introduces the new README layout, and fixes a bug with iptables_persistent_version.
+
+##### Changes
+
+* (GH-139) Throw away STDERR from dpkg-query in Fact
+* Update README to be consistent with module documentation template
+* Fix failing spec tests due to dpkg change in iptables_persistent_version
+
+---------------------------------------
+
+### 0.2.0 - 2012/3/3
+
+This release introduces automatic persistence, removing the need for the previous manual dependency requirement for persistent the running rules to the OS persistence file.
+
+Previously you would have required the following in your site.pp (or some other global location):
+
+    # Always persist firewall rules
+    exec { 'persist-firewall':
+      command     => $operatingsystem ? {
+        'debian'          => '/sbin/iptables-save > /etc/iptables/rules.v4',
+        /(RedHat|CentOS)/ => '/sbin/iptables-save > /etc/sysconfig/iptables',
+      },
+      refreshonly => true,
+    }
+    Firewall {
+      notify  => Exec['persist-firewall'],
+      before  => Class['my_fw::post'],
+      require => Class['my_fw::pre'],
+    }
+    Firewallchain {
+      notify  => Exec['persist-firewall'],
+    }
+    resources { "firewall":
+      purge => true
+    }
+
+You only need:
+
+    class { 'firewall': }
+    Firewall {
+      before  => Class['my_fw::post'],
+      require => Class['my_fw::pre'],
+    }
+
+To install pre-requisites and to create dependencies on your pre & post rules. Consult the README for more information.
+
+##### Changes
+
+* Firewall class manifests (Dan Carley)
+* Firewall and firewallchain persistence (Dan Carley)
+* (GH-134) Autorequire iptables related packages (Dan Carley)
+* Typo in #persist_iptables OS normalisation (Dan Carley)
+* Tests for #persist_iptables (Dan Carley)
+* (GH-129) Replace errant return in autoreq block (Dan Carley)
+
+---------------------------------------
+
+### 0.1.1 - 2012/2/28
+
+This release primarily fixes changing parameters in 3.x
+
+##### Changes
+
+* (GH-128) Change method_missing usage to define_method for 3.x compatibility
+* Update travis.yml gem specifications to actually test 2.6
+* Change source in Gemfile to use a specific URL for Ruby 2.0.0 compatibility
+
+---------------------------------------
+
+### 0.1.0 - 2012/2/24
+
+This release is somewhat belated, so no summary as there are far too many changes this time around. Hopefully we won't fall this far behind again :-).
+
+##### Changes
+
+* Add support for MARK target and set-mark property (Johan Huysmans)
+* Fix broken call to super for ruby-1.9.2 in munge (Ken Barber)
+* simple fix of the error message for allowed values of the jump property (Daniel Black)
+* Adding OSPF(v3) protocol to puppetlabs-firewall (Arnoud Vermeer)
+* Display multi-value: port, sport, dport and state command seperated (Daniel Black)
+* Require jump=>LOG for log params (Daniel Black)
+* Reject and document icmp => "any" (Dan Carley)
+* add firewallchain type and iptables_chain provider (Daniel Black)
+* Various fixes for firewallchain resource (Ken Barber)
+* Modify firewallchain name to be chain:table:protocol (Ken Barber)
+* Fix allvalidchain iteration (Ken Barber)
+* Firewall autorequire Firewallchains (Dan Carley)
+* Tests and docstring for chain autorequire (Dan Carley)
+* Fix README so setup instructions actually work (Ken Barber)
+* Support vlan interfaces (interface containing ".") (Johan Huysmans)
+* Add tests for VLAN support for iniface/outiface (Ken Barber)
+* Add the table when deleting rules (Johan Huysmans)
+* Fix tests since we are now prefixing -t)
+* Changed 'jump' to 'action', commands to lower case (Jason Short)
+* Support interface names containing "+" (Simon Deziel)
+* Fix for when iptables-save spews out "FATAL" errors (Sharif Nassar)
+* Fix for incorrect limit command arguments for ip6tables provider (Michael Hsu)
+* Document Util::Firewall.host_to_ip (Dan Carley)
+* Nullify addresses with zero prefixlen (Dan Carley)
+* Add support for --tcp-flags (Thomas Vander Stichele)
+* Make tcp_flags support a feature (Ken Barber)
+* OUTPUT is a valid chain for the mangle table (Adam Gibbins)
+* Enable travis-ci support (Ken Barber)
+* Convert an existing test to CIDR (Dan Carley)
+* Normalise iptables-save to CIDR (Dan Carley)
+* be clearer about what distributions we support (Ken Barber)
+* add gre protocol to list of acceptable protocols (Jason Hancock)
+* Added pkttype property (Ashley Penney)
+* Fix mark to not repeat rules with iptables 1.4.1+ (Sharif Nassar)
+* Stub iptables_version for now so tests run on non-Linux hosts (Ken Barber)
+* Stub iptables facts for set_mark tests (Dan Carley)
+* Update formatting of README to meet Puppet Labs best practices (Will Hopper)
+* Support for ICMP6 type code resolutions (Dan Carley)
+* Insert order hash included chains from different tables (Ken Barber)
+* rspec 2.11 compatibility (Jonathan Boyett)
+* Add missing class declaration in README (sfozz)
+* array_matching is contraindicated (Sharif Nassar)
+* Convert port Fixnum into strings (Sharif Nassar)
+* Update test framework to the modern age (Ken Barber)
+* working with ip6tables support (wuwx)
+* Remove gemfile.lock and add to gitignore (William Van Hevelingen)
+* Update travis and gemfile to be like stdlib travis files (William Van Hevelingen)
+* Add support for -m socket option (Ken Barber)
+* Add support for single --sport and --dport parsing (Ken Barber)
+* Fix tests for Ruby 1.9.3 from 3e13bf3 (Dan Carley)
+* Mock Resolv.getaddress in #host_to_ip (Dan Carley)
+* Update docs for source and dest - they are not arrays (Ken Barber)
+
+---------------------------------------
+
+### 0.0.4 - 2011/12/05
+
+This release adds two new parameters, 'uid' and 'gid'. As a part of the owner module, these params allow you to specify a uid, username, gid, or group got a match:
+
+    firewall { '497 match uid':
+      port => '123',
+      proto => 'mangle',
+      chain => 'OUTPUT',
+      action => 'drop'
+      uid => '123'
+    }
+
+This release also adds value munging for the 'log_level', 'source', and 'destination' parameters. The 'source' and 'destination' now support hostnames:
+
+    firewall { '498 accept from puppetlabs.com':
+      port => '123',
+      proto => 'tcp',
+      source => 'puppetlabs.com',
+      action => 'accept'
+    }
+
+
+The 'log_level' parameter now supports using log level names, such as 'warn', 'debug', and 'panic':
+
+    firewall { '499 logging':
+      port => '123',
+      proto => 'udp',
+      log_level => 'debug',
+      action => 'drop'
+    }
+
+Additional changes include iptables and ip6tables version facts, general whitespace cleanup, and adding additional unit tests.
+
+##### Changes
+
+* (#10957) add iptables_version and ip6tables_version facts
+* (#11093) Improve log_level property so it converts names to numbers
+* (#10723) Munge hostnames and IPs to IPs with CIDR
+* (#10718) Add owner-match support
+* (#10997) Add fixtures for ipencap
+* (#11034) Whitespace cleanup
+* (#10690) add port property support to ip6tables
+
+---------------------------------------
+
+### 0.0.3 - 2011/11/12
+
+This release introduces a new parameter 'port' which allows you to set both
+source and destination ports for a match:
+
+    firewall { "500 allow NTP requests":
+      port => "123",
+      proto => "udp",
+      action => "accept",
+    }
+
+We also have the limit parameter finally working:
+
+    firewall { "500 limit HTTP requests":
+      dport => 80,
+      proto => tcp,
+      limit => "60/sec",
+      burst => 30,
+      action => accept,
+    }
+
+State ordering has been fixed now, and more characters are allowed in the
+namevar:
+
+* Alphabetical
+* Numbers
+* Punctuation
+* Whitespace
+
+##### Changes
+
+* (#10693) Ensure -m limit is added for iptables when using 'limit' param
+* (#10690) Create new port property
+* (#10700) allow additional characters in comment string
+* (#9082) Sort iptables --state option values internally to keep it consistent across runs
+* (#10324) Remove extraneous whitespace from iptables rule line in spec tests
+
+---------------------------------------
+
+### 0.0.2 - 2011/10/26
+
+This is largely a maintanence and cleanup release, but includes the ability to
+specify ranges of ports in the sport/dport parameter:
+
+    firewall { "500 allow port range":
+      dport => ["3000-3030","5000-5050"],
+      sport => ["1024-65535"],
+      action => "accept",
+    }
+
+##### Changes
+
+* (#10295) Work around bug #4248 whereby the puppet/util paths are not being loaded correctly on the puppetmaster
+* (#10002) Change to dport and sport to handle ranges, and fix handling of name to name to port
+* (#10263) Fix tests on Puppet 2.6.x
+* (#10163) Cleanup some of the inline documentation and README file to align with general forge usage
+
+---------------------------------------
+
+### 0.0.1 - 2011/10/18
+
+Initial release.
+
+##### Changes
+
+* (#9362) Create action property and perform transformation for accept, drop, reject value for iptables jump parameter
+* (#10088) Provide a customised version of CONTRIBUTING.md
+* (#10026) Re-arrange provider and type spec files to align with Puppet
+* (#10026) Add aliases for test,specs,tests to Rakefile and provide -T as default
+* (#9439) fix parsing and deleting existing rules
+* (#9583) Fix provider detection for gentoo and unsupported linuxes for the iptables provider
+* (#9576) Stub provider so it works properly outside of Linux
+* (#9576) Align spec framework with Puppet core
+* and lots of other earlier development tasks ...

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/CONTRIBUTING.md	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,220 @@
+Checklist (and a short version for the impatient)
+=================================================
+
+  * Commits:
+
+    - Make commits of logical units.
+
+    - Check for unnecessary whitespace with "git diff --check" before
+      committing.
+
+    - Commit using Unix line endings (check the settings around "crlf" in
+      git-config(1)).
+
+    - Do not check in commented out code or unneeded files.
+
+    - The first line of the commit message should be a short
+      description (50 characters is the soft limit, excluding ticket
+      number(s)), and should skip the full stop.
+
+    - Associate the issue in the message. The first line should include
+      the issue number in the form "(#XXXX) Rest of message".
+
+    - The body should provide a meaningful commit message, which:
+
+      - uses the imperative, present tense: "change", not "changed" or
+        "changes".
+
+      - includes motivation for the change, and contrasts its
+        implementation with the previous behavior.
+
+    - Make sure that you have tests for the bug you are fixing, or
+      feature you are adding.
+
+    - Make sure the test suites passes after your commit:
+      `bundle exec rspec spec/acceptance` More information on [testing](#Testing) below
+
+    - When introducing a new feature, make sure it is properly
+      documented in the README.md
+
+  * Submission:
+
+    * Pre-requisites:
+
+      - Make sure you have a [GitHub account](https://github.com/join)
+
+      - [Create a ticket](https://tickets.puppetlabs.com/secure/CreateIssue!default.jspa), or [watch the ticket](https://tickets.puppetlabs.com/browse/) you are patching for.
+
+    * Preferred method:
+
+      - Fork the repository on GitHub.
+
+      - Push your changes to a topic branch in your fork of the
+        repository. (the format ticket/1234-short_description_of_change is
+        usually preferred for this project).
+
+      - Submit a pull request to the repository in the puppetlabs
+        organization.
+
+The long version
+================
+
+  1.  Make separate commits for logically separate changes.
+
+      Please break your commits down into logically consistent units
+      which include new or changed tests relevant to the rest of the
+      change.  The goal of doing this is to make the diff easier to
+      read for whoever is reviewing your code.  In general, the easier
+      your diff is to read, the more likely someone will be happy to
+      review it and get it into the code base.
+
+      If you are going to refactor a piece of code, please do so as a
+      separate commit from your feature or bug fix changes.
+
+      We also really appreciate changes that include tests to make
+      sure the bug is not re-introduced, and that the feature is not
+      accidentally broken.
+
+      Describe the technical detail of the change(s).  If your
+      description starts to get too long, that is a good sign that you
+      probably need to split up your commit into more finely grained
+      pieces.
+
+      Commits which plainly describe the things which help
+      reviewers check the patch and future developers understand the
+      code are much more likely to be merged in with a minimum of
+      bike-shedding or requested changes.  Ideally, the commit message
+      would include information, and be in a form suitable for
+      inclusion in the release notes for the version of Puppet that
+      includes them.
+
+      Please also check that you are not introducing any trailing
+      whitespace or other "whitespace errors".  You can do this by
+      running "git diff --check" on your changes before you commit.
+
+  2.  Sending your patches
+
+      To submit your changes via a GitHub pull request, we _highly_
+      recommend that you have them on a topic branch, instead of
+      directly on "master".
+      It makes things much easier to keep track of, especially if
+      you decide to work on another thing before your first change
+      is merged in.
+
+      GitHub has some pretty good
+      [general documentation](http://help.github.com/) on using
+      their site.  They also have documentation on
+      [creating pull requests](http://help.github.com/send-pull-requests/).
+
+      In general, after pushing your topic branch up to your
+      repository on GitHub, you can switch to the branch in the
+      GitHub UI and click "Pull Request" towards the top of the page
+      in order to open a pull request.
+
+
+  3.  Update the related GitHub issue.
+
+      If there is a GitHub issue associated with the change you
+      submitted, then you should update the ticket to include the
+      location of your branch, along with any other commentary you
+      may wish to make.
+
+Testing
+=======
+
+Getting Started
+---------------
+
+Our puppet modules provide [`Gemfile`](./Gemfile)s which can tell a ruby
+package manager such as [bundler](http://bundler.io/) what Ruby packages,
+or Gems, are required to build, develop, and test this software.
+
+Please make sure you have [bundler installed](http://bundler.io/#getting-started)
+on your system, then use it to install all dependencies needed for this project,
+by running
+
+```shell
+% bundle install
+Fetching gem metadata from https://rubygems.org/........
+Fetching gem metadata from https://rubygems.org/..
+Using rake (10.1.0)
+Using builder (3.2.2)
+-- 8><-- many more --><8 --
+Using rspec-system-puppet (2.2.0)
+Using serverspec (0.6.3)
+Using rspec-system-serverspec (1.0.0)
+Using bundler (1.3.5)
+Your bundle is complete!
+Use `bundle show [gemname]` to see where a bundled gem is installed.
+```
+
+NOTE some systems may require you to run this command with sudo.
+
+If you already have those gems installed, make sure they are up-to-date:
+
+```shell
+% bundle update
+```
+
+With all dependencies in place and up-to-date we can now run the tests:
+
+```shell
+% rake spec
+```
+
+This will execute all the [rspec tests](http://rspec-puppet.com/) tests
+under [spec/defines](./spec/defines), [spec/classes](./spec/classes),
+and so on. rspec tests may have the same kind of dependencies as the
+module they are testing. While the module defines in its [Modulefile](./Modulefile),
+rspec tests define them in [.fixtures.yml](./fixtures.yml).
+
+Some puppet modules also come with [beaker](https://github.com/puppetlabs/beaker)
+tests. These tests spin up a virtual machine under
+[VirtualBox](https://www.virtualbox.org/)) with, controlling it with
+[Vagrant](http://www.vagrantup.com/) to actually simulate scripted test
+scenarios. In order to run these, you will need both of those tools
+installed on your system.
+
+You can run them by issuing the following command
+
+```shell
+% rake spec_clean
+% rspec spec/acceptance
+```
+
+This will now download a pre-fabricated image configured in the [default node-set](./spec/acceptance/nodesets/default.yml),
+install puppet, copy this module and install its dependencies per [spec/spec_helper_acceptance.rb](./spec/spec_helper_acceptance.rb)
+and then run all the tests under [spec/acceptance](./spec/acceptance).
+
+Writing Tests
+-------------
+
+XXX getting started writing tests.
+
+If you have commit access to the repository
+===========================================
+
+Even if you have commit access to the repository, you will still need to
+go through the process above, and have someone else review and merge
+in your changes.  The rule is that all changes must be reviewed by a
+developer on the project (that did not write the code) to ensure that
+all changes go through a code review process.
+
+Having someone other than the author of the topic branch recorded as
+performing the merge is the record that they performed the code
+review.
+
+
+Additional Resources
+====================
+
+* [Getting additional help](http://puppetlabs.com/community/get-help)
+
+* [Writing tests](http://projects.puppetlabs.com/projects/puppet/wiki/Development_Writing_Tests)
+
+* [Patchwork](https://patchwork.puppetlabs.com)
+
+* [General GitHub documentation](http://help.github.com/)
+
+* [GitHub pull request documentation](http://help.github.com/send-pull-requests/)
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/Gemfile	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,47 @@
+source ENV['GEM_SOURCE'] || "https://rubygems.org"
+
+def location_for(place, fake_version = nil)
+  if place =~ /^(git:[^#]*)#(.*)/
+    [fake_version, { :git => $1, :branch => $2, :require => false }].compact
+  elsif place =~ /^file:\/\/(.*)/
+    ['>= 0', { :path => File.expand_path($1), :require => false }]
+  else
+    [place, { :require => false }]
+  end
+end
+
+group :development, :unit_tests do
+  gem 'rspec-core', '3.1.7',     :require => false
+  gem 'puppetlabs_spec_helper',  :require => false
+  gem 'simplecov',               :require => false
+  gem 'puppet_facts',            :require => false
+  gem 'json',                    :require => false
+end
+
+group :system_tests do
+  if beaker_version = ENV['BEAKER_VERSION']
+    gem 'beaker', *location_for(beaker_version)
+  end
+  if beaker_rspec_version = ENV['BEAKER_RSPEC_VERSION']
+    gem 'beaker-rspec', *location_for(beaker_rspec_version)
+  else
+    gem 'beaker-rspec',  :require => false
+  end
+  gem 'serverspec',    :require => false
+end
+
+
+
+if facterversion = ENV['FACTER_GEM_VERSION']
+  gem 'facter', facterversion, :require => false
+else
+  gem 'facter', :require => false
+end
+
+if puppetversion = ENV['PUPPET_GEM_VERSION']
+  gem 'puppet', puppetversion, :require => false
+else
+  gem 'puppet', :require => false
+end
+
+# vim:ft=ruby

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/LICENSE	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,25 @@
+Puppet Firewall Module - Puppet module for managing Firewalls
+
+Copyright (C) 2011-2013 Puppet Labs, Inc.
+Copyright (C) 2011 Jonathan Boyett
+Copyright (C) 2011 Media Temple, Inc.
+
+Some of the iptables code was taken from puppet-iptables which was:
+
+Copyright (C) 2011 Bob.sh Limited
+Copyright (C) 2008 Camptocamp Association
+Copyright (C) 2007 Dmitri Priimak
+
+Puppet Labs can be contacted at: info@puppetlabs.com
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/README.markdown	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,877 @@
+#firewall
+
+[![Build Status](https://travis-ci.org/puppetlabs/puppetlabs-firewall.png?branch=master)](https://travis-ci.org/puppetlabs/puppetlabs-firewall)
+
+####Table of Contents
+
+1. [Overview - What is the firewall module?](#overview)
+2. [Module Description - What does the module do?](#module-description)
+3. [Setup - The basics of getting started with firewall](#setup)
+    * [What firewall Affects](#what-firewall-affects)
+    * [Setup Requirements](#setup-requirements)
+    * [Beginning with firewall](#beginning-with-firewall)
+    * [Upgrading](#upgrading)
+4. [Usage - Configuration and customization options](#usage)
+    * [Default rules - Setting up general configurations for all firewalls](#default-rules)
+    * [Application-Specific Rules - Options for configuring and managing firewalls across applications](#application-specific-rules)
+    * [Additional Uses for the Firewall Module](#other-rules)
+5. [Reference - An under-the-hood peek at what the module is doing](#reference)
+6. [Limitations - OS compatibility, etc.](#limitations)
+7. [Development - Guide for contributing to the module](#development)
+    * [Tests - Testing your configuration](#tests)
+
+##Overview
+
+The firewall module lets you manage firewall rules with Puppet.
+
+##Module Description
+
+PuppetLabs' firewall module introduces the `firewall` resource, which is used to manage and configure firewall rules from within the Puppet DSL. This module offers support for iptables and ip6tables. The module also introduces the `firewallchain` resource, which allows you to manage chains or firewall lists and ebtables for bridging support. At the moment, only iptables and ip6tables chains are supported.
+
+The firewall module acts on your running firewall, making immediate changes as the catalog executes. Defining default pre and post rules allows you to provide global defaults for your hosts before and after any custom rules. Defining `pre` and `post` rules is also necessary to help you avoid locking yourself out of your own boxes when Puppet runs.
+
+##Setup
+
+###What firewall Affects
+
+* Every node running a firewall
+* Firewall settings in your system
+* Connection settings for managed nodes
+* Unmanaged resources (get purged)
+
+
+###Setup Requirements
+
+Firewall uses Ruby-based providers, so you must enable [pluginsync](http://docs.puppetlabs.com/guides/plugins_in_modules.html#enabling-pluginsync).
+
+###Beginning with firewall
+
+In the following two sections, you create new classes and then create firewall rules related to those classes. These steps are optional but provide a framework for firewall rules, which is helpful if you’re just starting to create them.
+
+If you already have rules in place, then you don’t need to do these two sections. However, be aware of the ordering of your firewall rules. The module will dynamically apply rules in the order they appear in the catalog, meaning a deny rule could be applied before the allow rules. This might mean the module hasn’t established some of the important connections, such as the connection to the Puppet master.
+
+The following steps are designed to ensure that you keep your SSH and other connections, primarily your connection to your Puppet master. If you create the `pre` and `post` classes described in the first section, then you also need to create the rules described in the second section.
+
+####Create the `my_fw::pre` and `my_fw::post` Classes
+
+This approach employs a whitelist setup, so you can define what rules you want and everything else is ignored rather than removed.
+
+The code in this section does the following:
+
+* The 'require' parameter in `firewall {}` ensures `my_fw::pre` is run before any other rules.  
+* In the `my_fw::post` class declaration, the 'before' parameter ensures `my_fw::post` is run after any other rules.
+
+Therefore, the run order is:
+
+* The rules in `my_fw::pre`
+* Your rules (defined in code)
+* The rules in `my_fw::post`
+
+The rules in the `pre` and `post` classes are fairly general. These two classes ensure that you retain connectivity and that you drop unmatched packets appropriately. The rules you define in your manifests are likely specific to the applications you run.
+
+1.) Add the `pre` class to my_fw/manifests/pre.pp. Your pre.pp file should contain any default rules to be applied first. The rules in this class should be added in the order you want them to run.2. 
+  ~~~puppet
+  class my_fw::pre {
+    Firewall {
+      require => undef,
+    }
+
+    # Default firewall rules
+    firewall { '000 accept all icmp':
+      proto   => 'icmp',
+      action  => 'accept',
+    }->
+    firewall { '001 accept all to lo interface':
+      proto   => 'all',
+      iniface => 'lo',
+      action  => 'accept',
+    }->
+    firewall { "002 reject local traffic not on loopback interface":
+      iniface     => '! lo',
+      proto       => 'all',
+      destination => '127.0.0.1/8',
+      action      => 'reject',
+    }->
+    firewall { '003 accept related established rules':
+      proto   => 'all',
+      state => ['RELATED', 'ESTABLISHED'],
+      action  => 'accept',
+    }
+  }
+  ~~~
+
+  The rules in `pre` should allow basic networking (such as ICMP and TCP) and ensure that existing connections are not closed.
+
+2.) Add the `post` class to my_fw/manifests/post.pp and include any default rules to be applied last.
+
+  ~~~puppet
+  class my_fw::post {
+    firewall { '999 drop all':
+      proto   => 'all',
+      action  => 'drop',
+      before  => undef,
+    }
+  }
+  ~~~
+
+Alternatively, the [firewallchain](#type-firewallchain) type can be used to set the default policy:
+
+  ~~~puppet
+  firewallchain { 'INPUT:filter:IPv4':
+    ensure => present,
+    policy => drop,
+    before => undef,
+  }
+  ~~~
+
+####Create Firewall Rules
+
+The rules you create here are helpful if you don’t have any existing rules; they help you order your firewall configurations so you don’t lock yourself out of your box.
+
+Rules are persisted automatically between reboots, although there are known issues with ip6tables on older Debian/Ubuntu distributions. There are also known issues with ebtables.
+
+1.) In site.pp or another top-scope file, add the following code to set up a metatype to purge unmanaged firewall resources. This will clear any existing rules and make sure that only rules defined in Puppet exist on the machine.
+
+  **Note** - This only purges IPv4 rules.
+  
+  ~~~puppet
+  resources { 'firewall':
+    purge => true
+  }
+  ~~~
+
+  To purge unmanaged firewall chains, also add:
+
+  ~~~puppet
+  resources { 'firewallchain':
+    purge => true
+  }
+  ~~~
+  
+  **Note** - If there are unmanaged rules in unmanaged chains, it will take two Puppet runs before the firewall chain is purged. This is different than the `purge` parameter available in `firewallchain`.
+
+2.)  Use the following code to set up the default parameters for all of the firewall rules you will establish later. These defaults will ensure that the `pre` and `post` classes are run in the correct order to avoid locking you out of your box during the first Puppet run.
+
+  ~~~puppet
+  Firewall {
+    before  => Class['my_fw::post'],
+    require => Class['my_fw::pre'],
+  }
+  ~~~
+
+3.) Then, declare the `my_fw::pre` and `my_fw::post` classes to satisfy dependencies. You can declare these classes using an External Node Classifier or the following code:
+
+  ~~~puppet
+  class { ['my_fw::pre', 'my_fw::post']: }
+  ~~~
+
+4.) Include the `firewall` class to ensure the correct packages are installed.
+
+  ~~~puppet
+  class { 'firewall': }
+  ~~~
+
+###Upgrading
+
+Use these steps if you already have a version of the firewall module installed.
+
+####From version 0.2.0 and more recent
+
+Upgrade the module with the puppet module tool as normal:
+
+    puppet module upgrade puppetlabs/firewall
+
+##Usage
+
+There are two kinds of firewall rules you can use with firewall: default rules and application-specific rules. Default rules apply to general firewall settings, whereas application-specific rules manage firewall settings for a specific application, node, etc.
+
+All rules employ a numbering system in the resource's title that is used for ordering. When titling your rules, make sure you prefix the rule with a number, for example, '000 accept all icmp requests'. _000_ runs first, _999_ runs last.
+
+###Default Rules
+
+You can place default rules in either `my_fw::pre` or `my_fw::post`, depending on when you would like them to run. Rules placed in the `pre` class will run first, and rules in the `post` class, last.
+
+In iptables, the title of the rule is stored using the comment feature of the underlying firewall subsystem. Values must match '/^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/'.
+
+####Examples of Default Rules
+
+Basic accept ICMP request example:
+
+~~~puppet
+firewall { "000 accept all icmp requests":
+  proto  => "icmp",
+  action => "accept",
+}
+~~~
+
+Drop all:
+
+~~~puppet
+firewall { "999 drop all other requests":
+  action => "drop",
+}
+~~~
+
+#### Example of an IPv6 rule
+
+IPv6 rules can be specified using the _ip6tables_ provider:
+
+~~~puppet
+firewall { "006 Allow inbound SSH (v6)":
+  port     => 22,
+  proto    => tcp,
+  action   => accept,
+  provider => 'ip6tables',
+}
+~~~
+
+###Application-Specific Rules
+
+Puppet doesn't care where you define rules, and this means that you can place
+your firewall resources as close to the applications and services that you
+manage as you wish. If you use the [roles and profiles
+pattern](https://puppetlabs.com/learn/roles-profiles-introduction) then it
+makes sense to create your firewall rules in the profiles, so they
+remain close to the services managed by the profile.
+
+This is an example of firewall rules in a profile:
+
+~~~puppet
+class profile::apache {
+  include apache
+  apache::vhost { 'mysite': ensure => present }
+
+  firewall { '100 allow http and https access':
+    port   => [80, 443],
+    proto  => tcp,
+    action => accept,
+  }
+}
+~~~
+
+###Rule inversion
+Firewall rules may be inverted by prefixing the value of a parameter by "! ". If the value is an array, then every item in the array must be prefixed as iptables does not understand inverting a single value.
+
+Parameters that understand inversion are: connmark, ctstate, destination, dport, dst\_range, dst\_type, iniface, outiface, port, proto, source, sport, src\_range, src\_type, and state.
+
+Examples:
+
+~~~puppet
+firewall { '001 disallow esp protocol':
+  action => 'accept',
+  proto  => '! esp',
+}
+firewall { '002 drop NEW external website packets with FIN/RST/ACK set and SYN unset':
+  chain     => 'INPUT',
+  state     => 'NEW',
+  action    => 'drop',
+  proto     => 'tcp',
+  sport     => ['! http', '! 443'],
+  source    => '! 10.0.0.0/8',
+  tcp_flags => '! FIN,SYN,RST,ACK SYN',
+}
+~~~
+
+###Additional Uses for the Firewall Module
+
+You can apply firewall rules to specific nodes. Usually, you will want to put the firewall rule in another class and apply that class to a node. Apply a rule to a node as follows:
+
+~~~puppet
+node 'some.node.com' {
+  firewall { '111 open port 111':
+    dport => 111
+  }
+}
+~~~
+
+You can also do more complex things with the `firewall` resource. This example sets up static NAT for the source network 10.1.2.0/24:
+
+~~~puppet
+firewall { '100 snat for network foo2':
+  chain    => 'POSTROUTING',
+  jump     => 'MASQUERADE',
+  proto    => 'all',
+  outiface => "eth0",
+  source   => '10.1.2.0/24',
+  table    => 'nat',
+}
+~~~
+
+
+You can also change the TCP MSS value for VPN client traffic:
+
+~~~puppet
+firewall { '110 TCPMSS for VPN clients':
+  chain     => 'FORWARD',
+  table     => 'mangle',
+  source    => '10.0.2.0/24',
+  proto     => tcp,
+  tcp_flags => 'SYN,RST SYN',
+  mss       => '1361:1541',
+  set_mss   => '1360',
+  jump      => 'TCPMSS',
+}
+~~~
+
+The following will mirror all traffic sent to the server to a secondary host on the LAN with the TEE target:
+
+~~~puppet
+firewall { '503 Mirror traffic to IDS':
+  proto   => all,
+  jump    => 'TEE',
+  gateway => '10.0.0.2',
+  chain   => 'PREROUTING',
+  table   => 'mangle',
+}
+~~~
+
+The following example creates a new chain and forwards any port 5000 access to it.
+~~~puppet
+firewall { '100 forward to MY_CHAIN':
+  chain   => 'INPUT',
+  jump    => 'MY_CHAIN',
+}
+# The namevar here is in the format chain_name:table:protocol
+firewallchain { 'MY_CHAIN:filter:IPv4':
+  ensure  => present,
+}
+firewall { '100 my rule':
+  chain   => 'MY_CHAIN',
+  action  => 'accept',
+  proto   => 'tcp',
+  dport   => 5000,
+}
+~~~
+
+###Additional Information
+
+Access the inline documentation:
+
+    puppet describe firewall
+
+Or
+
+    puppet doc -r type
+    (and search for firewall)
+
+##Reference
+
+Classes:
+
+* [firewall](#class-firewall)
+
+Types:
+
+* [firewall](#type-firewall)
+* [firewallchain](#type-firewallchain)
+
+Facts:
+
+* [ip6tables_version](#fact-ip6tablesversion)
+* [iptables_version](#fact-iptablesversion)
+* [iptables_persistent_version](#fact-iptablespersistentversion)
+
+###Class: firewall
+
+Performs the basic setup tasks required for using the firewall resources.
+
+At the moment this takes care of:
+
+* iptables-persistent package installation
+
+Include the `firewall` class for nodes that need to use the resources in this module:
+
+    class { 'firewall': }
+
+####ensure
+
+Parameter that controls the state of the iptables service on your system, allowing you to disable iptables if you want.
+
+`ensure` can either be 'running' or 'stopped'. Default to 'running'.
+
+####package
+
+Specify the platform-specific package(s) to install. Defaults defined in `firewall::params`.
+
+####service
+
+Specify the platform-specific service(s) to start or stop. Defaults defined in `firewall::params`.
+
+###Type: firewall
+
+This type enables you to manage firewall rules within Puppet.
+
+####Providers
+**Note:** Not all features are available with all providers.
+
+ * `ip6tables`: Ip6tables type provider
+    * Required binaries: `ip6tables-save`, `ip6tables`.
+    * Supported features: `address_type`, `connection_limiting`, `dnat`, `hop_limiting`, `icmp_match`, `interface_match`, `iprange`, `ipsec_dir`, `ipsec_policy`, `ipset`, `iptables`, `isfirstfrag`, `ishasmorefrags`, `islastfrag`, `log_level`, `log_prefix`, `mark`, `mask`, `mss`, `owner`, `pkttype`, `rate_limiting`, `recent_limiting`, `reject_type`, `snat`, `socket`, `state_match`, `tcp_flags`.
+
+* `iptables`: Iptables type provider
+    * Required binaries: `iptables-save`, `iptables`.
+    * Default for `kernel` == `linux`.
+    * Supported features: `address_type`, `connection_limiting`, `dnat`, `icmp_match`, `interface_match`, `iprange`, `ipsec_dir`, `ipsec_policy`, `ipset`, `iptables`, `isfragment`, `log_level`, `log_prefix`, `mark`, `mask`, `mss`, `netmap`, `owner`, `pkttype`, `rate_limiting`, `recent_limiting`, `reject_type`, `snat`, `socket`, `state_match`, `tcp_flags`.
+
+**Autorequires:**
+
+If Puppet is managing the iptables or ip6tables chains specified in the `chain` or `jump` parameters, the firewall resource will autorequire those firewallchain resources.
+
+If Puppet is managing the iptables or iptables-persistent packages, and the provider is iptables or ip6tables, the firewall resource will autorequire those packages to ensure that any required binaries are installed.
+
+#### Features
+
+* `address_type`: The ability to match on source or destination address type.
+
+* `connection_limiting`: Connection limiting features.
+
+* `dnat`: Destination NATing.
+
+* `hop_limiting`: Hop limiting features.
+
+* `icmp_match`: The ability to match ICMP types.
+
+* `interface_match`: Interface matching.
+
+* `iprange`: The ability to match on source or destination IP range.
+
+* `ipsec_dir`: The ability to match IPsec policy direction.
+
+* `ipsec_policy`: The ability to match IPsec policy.
+
+* `iptables`: The provider provides iptables features.
+
+* `isfirstfrag`: The ability to match the first fragment of a fragmented ipv6 packet.
+
+* `isfragment`: The ability to match fragments.
+
+* `ishasmorefrags`: The ability to match a non-last fragment of a fragmented ipv6 packet.
+
+* `islastfrag`: The ability to match the last fragment of an ipv6 packet.
+
+* `log_level`: The ability to control the log level.
+
+* `log_prefix`: The ability to add prefixes to log messages.
+
+* `mark`: The ability to match or set the netfilter mark value associated with the packet.
+
+* `mask`:  The ability to match recent rules based on the ipv4 mask.
+
+* `owner`: The ability to match owners.
+
+* `pkttype`: The ability to match a packet type.
+
+* `rate_limiting`: Rate limiting features.
+
+* `recent_limiting`: The netfilter recent module.
+
+* `reject_type`: The ability to control reject messages.
+
+* `set_mss`: Set the TCP MSS of a packet.
+
+* `snat`: Source NATing.
+
+* `socket`: The ability to match open sockets.
+
+* `state_match`: The ability to match stateful firewall states.
+
+* `tcp_flags`: The ability to match on particular TCP flag settings.
+
+* `netmap`: The ability to map entire subnets via source or destination nat rules.
+
+#### Parameters
+
+* `action`: This is the action to perform on a match. Valid values for this action are:
+  * 'accept': The packet is accepted.
+  * 'reject': The packet is rejected with a suitable ICMP response.
+  * 'drop': The packet is dropped.
+
+   If you specify no value it will simply match the rule but perform no action unless you provide a provider-specific parameter (such as `jump`).
+
+* `burst`: Rate limiting burst value (per second) before limit checks apply. Values must match '/^\d+$/'. Requires the `rate_limiting` feature.
+
+* `chain`: Name of the chain to use. You can provide a user-based chain or use one of the following built-in chains:'INPUT','FORWARD','OUTPUT','PREROUTING', or 'POSTROUTING'. The default value is 'INPUT'. Values must match '/^[a-zA-Z0-9\-_]+$/'. Requires the `iptables` feature.
+
+* `checksum_fill`: When using a `jump` value of 'CHECKSUM', this boolean makes sure that a checksum is calculated and filled in a packet that lacks a checksum. Valid values are 'true' or 'false'. Requires the `iptables` feature.
+
+* `clamp_mss_to_pmtu`: Enables PMTU Clamping support when using a jump target of 'TCPMSS'. Valid values are 'true' or 'false'.
+
+* `connlimit_above`: Connection limiting value for matched connections above n. Values must match '/^\d+$/'. Requires the `connection_limiting` feature.
+
+* `connlimit_mask`: Connection limiting by subnet mask for matched connections. Apply a subnet mask of /0 to /32 for IPv4, and a subnet mask of /0 to /128 for IPv6. Values must match '/^\d+$/'. Requires the `connection_limiting` feature.
+
+* `connmark`: Match the Netfilter mark value associated with the packet. Accepts values `mark/mask` or `mark`. These will be converted to hex if they are not hex already. Requires the `mark` feature.
+
+* `ctstate`: Matches a packet based on its state in the firewall stateful inspection table, using the conntrack module. Valid values are: 'INVALID', 'ESTABLISHED', 'NEW', 'RELATED'. Requires the `state_match` feature.
+
+* `date_start`: Start Date/Time for the rule to match, which must be in ISO 8601 "T" notation. The possible time range is '1970-01-01T00:00:00' to '2038-01-19T04:17:07'
+
+* `date_stop`: End Date/Time for the rule to match, which must be in ISO 8601 "T" notation. The possible time range is '1970-01-01T00:00:00' to '2038-01-19T04:17:07'
+
+* `destination`: The destination address to match. For example: `destination => '192.168.1.0/24'`. You can also negate a mask by putting ! in front. For example: `destination  => '! 192.168.2.0/24'`. The destination can also be an IPv6 address if your provider supports it.
+
+  For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
+
+* `dport`: The destination port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
+
+* `dst_range`: The destination IP range. For example: `dst_range => '192.168.1.1-192.168.1.10'`.
+
+  The destination IP range is must in 'IP1-IP2' format. Values in the range must be valid IPv4 or IPv6 addresses. Requires the `iprange` feature.
+
+* `dst_type`: The destination address type. For example: `dst_type => 'LOCAL'`.
+
+  Valid values are:
+
+  * 'UNSPEC': an unspecified address
+  * 'UNICAST': a unicast address
+  * 'LOCAL': a local address
+  * 'BROADCAST': a broadcast address
+  * 'ANYCAST': an anycast packet
+  * 'MULTICAST': a multicast address
+  * 'BLACKHOLE': a blackhole address
+  * 'UNREACHABLE': an unreachable address
+  * 'PROHIBIT': a prohibited address
+  * 'THROW': an unroutable address
+  * 'XRESOLVE: an unresolvable address
+
+  Requires the `address_type` feature.
+
+* `ensure`: Ensures that the resource is present. Valid values are 'present', 'absent'. The default is 'present'.
+
+* `gateway`: Used with TEE target to mirror traffic of a machine to a secondary host on the LAN.
+
+* `gid`: GID or Group owner matching rule. Accepts a string argument only, as iptables does not accept multiple gid in a single statement. Requires the `owner` feature.
+
+* `hop_limit`: Hop limiting value for matched packets. Values must match '/^\d+$/'. Requires the `hop_limiting` feature.
+
+* `icmp`: When matching ICMP packets, this indicates the type of ICMP packet to match. A value of 'any' is not supported. To match any type of ICMP packet, the parameter should be omitted or undefined. Requires the `icmp_match` feature.
+
+* `iniface`: Input interface to filter on. Values must match '/^!?\s?[a-zA-Z0-9\-\._\+\:]+$/'.  Requires the `interface_match` feature.  Supports interface alias (eth0:0) and negation.
+
+* `ipsec_dir`: Sets the ipsec policy direction. Valid values are 'in', 'out'. Requires the `ipsec_dir` feature.
+
+* `ipsec_policy`: Sets the ipsec policy type. Valid values are 'none', 'ipsec'. Requires the `ipsec_policy` feature.
+
+* `ipset`: Matches IP sets. Value must be 'ipset_name (src|dst|src,dst)' and can be negated by putting ! in front. Requires ipset kernel module.
+
+* `isfirstfrag`: If true, matches when the packet is the first fragment of a fragmented ipv6 packet. Cannot be negated. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the `isfirstfrag` feature.
+
+* `isfragment`: If 'true', matches when the packet is a tcp fragment of a fragmented packet. Supported by iptables only. Valid values are 'true', 'false'. Requires features `isfragment`.
+
+* `ishasmorefrags`: If 'true', matches when the packet has the 'more fragments' bit set. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the `ishasmorefrags` feature.
+
+* `islastfrag`: If true, matches when the packet is the last fragment of a fragmented ipv6 packet. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the `islastfrag`.
+
+* `jump`: The value for the iptables `--jump` parameter. Any valid chain name is allowed, but normal values are: 'QUEUE', 'RETURN', 'DNAT', 'SNAT', 'LOG', 'MASQUERADE', 'REDIRECT', 'MARK', 'TCPMSS'.
+
+  For the values 'ACCEPT', 'DROP', and 'REJECT', you must use the generic `action` parameter. This is to enforce the use of generic parameters where possible for maximum cross-platform modeling.
+
+  If you set both `accept` and `jump` parameters, you will get an error, because only one of the options should be set. Requires the `iptables` feature.
+
+* `kernel_timezone`: Use the kernel timezone instead of UTC to determine whether a packet meets the time regulations.
+
+* `limit`: Rate limiting value for matched packets. The format is: 'rate/[/second/|/minute|/hour|/day]'. Example values are: '50/sec', '40/min', '30/hour', '10/day'. Requires the  `rate_limiting` feature.
+
+* `line`: Read-only property for caching the rule line.
+
+* `log_level`: When combined with `jump => 'LOG'` specifies the system log level to log to. Requires the `log_level` feature.
+
+* `log_prefix`: When combined with `jump => 'LOG'` specifies the log prefix to use when logging. Requires the `log_prefix` feature.
+
+* `mask`: Sets the mask to use when `recent` is enabled. Requires the `mask` feature.
+
+* `month_days`: Only match on the given days of the month. Possible values are '1' to '31'. Note that specifying '31' will not match on months that do not have a 31st day; the same goes for 28- or 29-day February.
+
+* `match_mark`: Match the Netfilter mark value associated with the packet. Accepts either of mark/mask or mark. These will be converted to hex if they are not already. Requires the `mark` feature.
+
+* `mss`: Sets a given TCP MSS value or range to match.
+
+* `name`: The canonical name of the rule. This name is also used for ordering, so make sure you prefix the rule with a number. For example:
+
+~~~puppet
+firewall { '000 this runs first':
+  # this rule will run first
+}
+firewall { '999 this runs last':
+  # this rule will run last
+}
+ ~~~
+
+  Depending on the provider, the name of the rule can be stored using the comment feature of the underlying firewall subsystem. Values must match '/^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/'.
+
+* `outiface`: Output interface to filter on. Values must match '/^!?\s?[a-zA-Z0-9\-\._\+\:]+$/'.  Requires the `interface_match` feature.  Supports interface alias (eth0:0) and negation.
+
+* `physdev_in`: Match if the packet is entering a bridge from the given interface. Values must match '/^[a-zA-Z0-9\-\._\+]+$/'.
+
+* `physdev_out`: Match if the packet is leaving a bridge via the given interface. Values must match '/^[a-zA-Z0-9\-\._\+]+$/'.
+
+* `physdev_is_bridged`: Match if the packet is transversing a bridge. Valid values are true or false.
+
+* `pkttype`: Sets the packet type to match. Valid values are: 'unicast', 'broadcast', and'multicast'. Requires the `pkttype` feature.
+
+* `port`: The destination or source port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
+
+* `proto`: The specific protocol to match for this rule. This is 'tcp' by default. Valid values are:
+  * 'tcp'
+  * 'udp'
+  * 'icmp'
+  * 'ipv4'
+  * 'ipv6'
+  * 'ipv6-icmp'
+  * 'esp'
+  * 'ah'
+  * 'vrrp'
+  * 'igmp'
+  * 'ipencap'
+  * 'ospf'
+  * 'gre'
+  * 'all'
+
+* `provider`: The specific backend to use for this firewall resource. You will seldom need to specify this --- Puppet will usually discover the appropriate provider for your platform. Available providers are ip6tables and iptables. See the [Providers](#providers) section above for details about these providers.
+
+ * `random`: When using a `jump` value of 'MASQUERADE', 'DNAT', 'REDIRECT', or 'SNAT', this boolean will enable randomized port mapping. Valid values are true or false. Requires the `dnat` feature.
+
+* `rdest`: If boolean 'true', adds the destination IP address to the list. Valid values are true or false. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `reap`: Can only be used in conjunction with the `rseconds` parameter. If boolean 'true', this will purge entries older than 'seconds' as specified in `rseconds`. Valid values are true or false. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `recent`: Enable the recent module. Valid values are: 'set', 'update', 'rcheck', or 'remove'. For example:
+
+~~~puppet
+# If anyone's appeared on the 'badguy' blacklist within
+# the last 60 seconds, drop their traffic, and update the timestamp.
+firewall { '100 Drop badguy traffic':
+  recent   => 'update',
+  rseconds => 60,
+  rsource  => true,
+  rname    => 'badguy',
+  action   => 'DROP',
+  chain    => 'FORWARD',
+}
+# No-one should be sending us traffic on eth0 from localhost
+# Blacklist them
+firewall { '101 blacklist strange traffic':
+  recent      => 'set',
+  rsource     => true,
+  rname       => 'badguy',
+  destination => '127.0.0.0/8',
+  iniface     => 'eth0',
+  action      => 'DROP',
+  chain       => 'FORWARD',
+}
+~~~
+
+  Requires the `recent_limiting` feature.
+
+* `reject`: When combined with `jump => 'REJECT'`, you can specify a different ICMP response to be sent back to the packet sender. Requires the `reject_type` feature.
+
+* `rhitcount`: Used in conjunction with `recent => 'update'` or `recent => 'rcheck'`. When used, this will narrow the match to happen only when the address is in the list and packets greater than or equal to the given value have been received. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `rname`: Specify the name of the list. Takes a string argument. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `rseconds`: Used in conjunction with `recent => 'rcheck'` or `recent => 'update'`. When used, this will narrow the match to only happen when the address is in the list and was seen within the last given number of seconds. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `rsource`: If boolean 'true', adds the source IP address to the list. Valid values are 'true', 'false'. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `rttl`: May only be used in conjunction with `recent => 'rcheck'` or `recent => 'update'`. If boolean 'true', this will narrow the match to happen only when the address is in the list and the TTL of the current packet matches that of the packet that hit the `recent => 'set'` rule. If you have problems with DoS attacks via bogus packets from fake source addresses, this parameter may help. Valid values are 'true', 'false'. Requires the `recent_limiting` feature and the `recent` parameter.
+
+* `set_mark`: Set the Netfilter mark value associated with the packet. Accepts either  'mark/mask' or 'mark'. These will be converted to hex if they are not already. Requires the `mark` feature.
+
+* `set_mss`: When combined with `jump => 'TCPMSS'` specifies the value of the MSS field.
+
+* `socket`: If 'true', matches if an open socket can be found by doing a socket lookup on the packet. Valid values are 'true', 'false'. Requires the `socket` feature.
+
+* `source`: The source address. For example: `source => '192.168.2.0/24'`. You can also negate a mask by putting ! in front. For example: `source => '! 192.168.2.0/24'`. The source can also be an IPv6 address if your provider supports it.
+
+* `sport`: The source port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format:'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
+
+* `src_range`: The source IP range. For example: `src_range => '192.168.1.1-192.168.1.10'`. The source IP range must be in 'IP1-IP2' format. Values in the range must be valid IPv4 or IPv6 addresses. Requires the `iprange` feature.
+
+* `src_type`: Specify the source address type. For example: `src_type => 'LOCAL'`.
+
+  Valid values are:
+
+  * 'UNSPEC': an unspecified address.
+  * 'UNICAST': a unicast address.
+  * 'LOCAL': a local address.
+  * 'BROADCAST': a broadcast address.
+  * 'ANYCAST': an anycast packet.
+  * 'MULTICAST': a multicast address.
+  * 'BLACKHOLE': a blackhole address.
+  * 'UNREACHABLE': an unreachable address.
+  * 'PROHIBIT': a prohibited address.
+  * 'THROW': an unroutable address.
+  * 'XRESOLVE': an unresolvable address.
+
+  Requires the `address_type` feature.
+
+* `stat_every`: Match one packet every nth packet. Requires `stat_mode => 'nth'`
+
+* `stat_mode`: Set the matching mode for statistic matching. Supported modes are `random` and `nth`.
+
+* `stat_packet`: Set the initial counter value for the nth mode. Must be between 0 and the value of `stat_every`. Defaults to 0. Requires `stat_mode => 'nth'`
+
+* `stat_probability`: Set the probability from 0 to 1 for a packet to be randomly matched. It works only with `stat_mode => 'random'`.
+
+* `state`: Matches a packet based on its state in the firewall stateful inspection table. Valid values are: 'INVALID', 'ESTABLISHED', 'NEW', 'RELATED'. Requires the `state_match` feature.
+
+* `table`: Table to use. Valid values are: 'nat', 'mangle', 'filter', 'raw', 'rawpost'. By default the setting is 'filter'. Requires the `iptables` feature.
+
+* `tcp_flags`: Match when the TCP flags are as specified. Set as a string with a list of comma-separated flag names for the mask, then a space, then a comma-separated list of flags that should be set. The flags are: 'SYN', 'ACK', 'FIN', 'RST', 'URG', 'PSH', 'ALL', 'NONE'.
+
+   Note that you specify flags in the order that iptables `--list` rules would list them to avoid having Puppet think you changed the flags. For example, 'FIN,SYN,RST,ACK SYN' matches packets with the SYN bit set and the ACK, RST and FIN bits cleared. Such packets are used to request TCP connection initiation. Requires the `tcp_flags` feature.
+
+* `time_contiguous`: When the `time_stop` value is smaller than the `time_start` value, match this as a single time period instead of distinct intervals.
+
+* `time_start`: Start time for the rule to match. The possible time range is '00:00:00' to '23:59:59'. Leading zeroes are allowed (e.g. '06:03') and correctly interpreted as base-10.
+
+* `time_stop`: End time for the rule to match. The possible time range is '00:00:00' to '23:59:59'. Leading zeroes are allowed (e.g. '06:03') and correctly interpreted as base-10.
+
+* `todest`: When using `jump => 'DNAT'`, you can specify the new destination address using this parameter. Requires the `dnat` feature.
+
+* `toports`: For DNAT this is the port that will replace the destination port. Requires the `dnat` feature.
+
+* `tosource`: When using `jump => 'SNAT'`, you can specify the new source address using this parameter. Requires the `snat` feature.
+
+* `to`: When using `jump => 'NETMAP'`, you can specify a source or destination subnet to nat to. Requires the `netmap` feature`.
+
+* `uid`: UID or Username owner matching rule. Accepts a string argument only, as iptables does not accept multiple uid in a single statement. Requires the `owner` feature.
+
+* `week_days`: Only match on the given weekdays. Possible values are 'Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat', 'Sun'.
+
+###Type: firewallchain
+
+Enables you to manage rule chains for firewalls.
+
+Currently this type supports only iptables, ip6tables, and ebtables on Linux. It also provides support for setting the default policy on chains and tables that allow it.
+
+**Autorequires**: If Puppet is managing the iptables or iptables-persistent packages, and the provider is iptables_chain, the firewall resource will autorequire those packages to ensure that any required binaries are installed.
+
+####Providers
+
+`iptables_chain` is the only provider that supports firewallchain.
+
+####Features
+
+* `iptables_chain`: The provider provides iptables chain features.
+* `policy`: Default policy (inbuilt chains only).
+
+####Parameters
+
+* `ensure`: Ensures that the resource is present. Valid values are 'present', 'absent'.
+
+* `ignore`: Regex to perform on firewall rules to exempt unmanaged rules from purging (when enabled). This is matched against the output of iptables-save. This can be a single regex or an array of them. To support flags, use the ruby inline flag mechanism: a regex such as '/foo/i' can be written as '(?i)foo' or '(?i:foo)'. Only when purge is 'true'.
+
+  Full example:
+~~~puppet
+firewallchain { 'INPUT:filter:IPv4':
+  purge  => true,
+  ignore => [
+    # ignore the fail2ban jump rule
+    '-j fail2ban-ssh',
+    # ignore any rules with "ignore" (case insensitive) in the comment in the rule
+    '--comment "[^"](?i:ignore)[^"]"',
+    ],
+}
+~~~
+
+* `name`: Specify the canonical name of the chain. For iptables the format must be {chain}:{table}:{protocol}.
+
+* `policy`: Set the action the packet will perform when the end of the chain is reached. It can only be set on inbuilt chains ('INPUT', 'FORWARD', 'OUTPUT', 'PREROUTING', 'POSTROUTING'). Valid values are:
+
+  * 'accept': The packet is accepted.
+  * 'drop': The packet is dropped.
+  * 'queue': The packet is passed userspace.
+  * 'return': The packet is returned to calling (jump) queue or to the default of inbuilt chains.
+
+* `provider`: The specific backend to use for this firewallchain resource. You will seldom need to specify this --- Puppet will usually discover the appropriate provider for your platform. The only available provider is:
+
+  `iptables_chain`: iptables chain provider
+
+    * Required binaries: `ebtables-save`, `ebtables`, `ip6tables-save`, `ip6tables`, `iptables-save`, `iptables`.
+    * Default for `kernel` == `linux`.
+    * Supported features: `iptables_chain`, `policy`.
+
+* `purge`: Purge unmanaged firewall rules in this chain. Valid values are 'false', 'true'.
+
+**Note** This `purge` is purging unmanaged rules in a firewall chain, not unmanaged firewall chains. To purge unmanaged firewall chains, use the following instead.
+
+~~~puppet
+resources { 'firewallchain':
+  purge => true
+}
+~~~
+
+###Fact: ip6tables_version
+
+A Facter fact that can be used to determine what the default version of ip6tables is for your operating system/distribution.
+
+###Fact: iptables_version
+
+A Facter fact that can be used to determine what the default version of iptables is for your operating system/distribution.
+
+###Fact: iptables_persistent_version
+
+Retrieves the version of iptables-persistent from your OS. This is a Debian/Ubuntu specific fact.
+
+##Limitations
+
+###SLES
+
+The `socket` parameter is not supported on SLES.  In this release it will cause
+the catalog to fail with iptables failures, rather than correctly warn you that
+the features are unusable.
+
+###Oracle Enterprise Linux
+
+The `socket` and `owner` parameters are unsupported on Oracle Enterprise Linux
+when the "Unbreakable" kernel is used. These may function correctly when using
+the stock RedHat kernel instead. Declaring either of these parameters on an
+unsupported system will result in iptable rules failing to apply.
+
+### Debian 8 Support
+
+As Puppet Enterprise itself does not yet support Debian 8, use of this module with Puppet Enterprise under a Debian 8
+system should be regarded as experimental.
+
+###Other
+
+Bugs can be reported in JIRA:
+
+<http://tickets.puppetlabs.com>
+
+##Development
+
+Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.
+
+We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.
+
+You can read the complete module contribution guide [on the Puppet Labs wiki.](http://projects.puppetlabs.com/projects/module-site/wiki/Module_contributing)
+
+For this particular module, please also read CONTRIBUTING.md before contributing.
+
+Currently we support:
+
+* iptables
+* ip6tables
+* ebtables (chains only)
+
+###Testing
+
+Make sure you have:
+
+* rake
+* bundler
+
+Install the necessary gems:
+
+    bundle install
+
+And run the tests from the root of the source code:
+
+    rake test
+
+If you have a copy of Vagrant 1.1.0 you can also run the system tests:
+
+    RS_SET=ubuntu-1404-x64 rspec spec/acceptance
+    RS_SET=centos-64-x64 rspec spec/acceptance

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/Rakefile	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,10 @@
+require 'puppetlabs_spec_helper/rake_tasks'
+require 'puppet-lint/tasks/puppet-lint'
+
+PuppetLint.configuration.fail_on_warnings = true
+PuppetLint.configuration.send('relative')
+PuppetLint.configuration.send('disable_80chars')
+PuppetLint.configuration.send('disable_class_inherits_from_params_class')
+PuppetLint.configuration.send('disable_documentation')
+PuppetLint.configuration.send('disable_single_quote_string_with_variables')
+PuppetLint.configuration.ignore_paths = ["spec/**/*.pp", "pkg/**/*.pp"]

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/checksums.json	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,83 @@
+{
+  "CHANGELOG.md": "ec5b90d93209e656ae03c30363e4d57f",
+  "CONTRIBUTING.md": "e2b8e8e433fc76b3798b7fe435f49375",
+  "Gemfile": "e62c96457cdaab2a09f1a37479ea6351",
+  "LICENSE": "ade7f2bb88b5b4f034152822222ec314",
+  "README.markdown": "3de37071f3aeb963a326512acc3d2da3",
+  "Rakefile": "d953eb985f82600dc3b9ac6e1f2cfe64",
+  "lib/facter/ip6tables_version.rb": "091123ad703f1706686bca4398c5b06f",
+  "lib/facter/iptables_persistent_version.rb": "8ea76fecb8032174823ef6fb846c83c9",
+  "lib/facter/iptables_version.rb": "facbd760223f236538b731c1d1f6cf8f",
+  "lib/puppet/provider/firewall/ip6tables.rb": "9565dec31930751daeeb1672c6da54c1",
+  "lib/puppet/provider/firewall/iptables.rb": "bf57c8a927930610d067e4cefd83799f",
+  "lib/puppet/provider/firewall.rb": "32d2f5e5dcc082986b82ef26a119038b",
+  "lib/puppet/provider/firewallchain/iptables_chain.rb": "98ac7c8a44014681a243da2391b09de6",
+  "lib/puppet/type/firewall.rb": "edec9406e72ceddd35f814a281180cdc",
+  "lib/puppet/type/firewallchain.rb": "13095c792e72a2e53a040fb2025c9052",
+  "lib/puppet/util/firewall.rb": "7bcbadf9890c044a49cc58b535352269",
+  "lib/puppet/util/ipcidr.rb": "e1160dfd6e73fc5ef2bb8abc291f6fd5",
+  "manifests/init.pp": "8b7e2921859e31264086f9d5c5d99e66",
+  "manifests/linux/archlinux.pp": "6b1809b8b9c1e9c56bb081b4ef31f198",
+  "manifests/linux/debian.pp": "97b146cb2aa3accd91aaf7a9177500d2",
+  "manifests/linux/gentoo.pp": "dc2120f24c259608884d90cb6a9ae27d",
+  "manifests/linux/redhat.pp": "6b2e03c4fff3e03435dc1d742e19f277",
+  "manifests/linux.pp": "951f1c2b2d5bfe393a1b281baad2ec71",
+  "manifests/params.pp": "dbe73a18bf95965108067ecbdfd71301",
+  "metadata.json": "c69ee5a496ee18ea83f80379cff76d9e",
+  "spec/acceptance/change_source_spec.rb": "86279f2f4ad9e0532c9ffab00db8e009",
+  "spec/acceptance/class_spec.rb": "bf8fabb101db46d438fa3aedf35bba08",
+  "spec/acceptance/connlimit_spec.rb": "b0b6600381479e692d0f50215cc15121",
+  "spec/acceptance/connmark_spec.rb": "cf4233e7327af69f0d4431d63140edf1",
+  "spec/acceptance/firewall_bridging_spec.rb": "1ab9896f8cde919000337b44290da978",
+  "spec/acceptance/firewall_iptmodules_spec.rb": "4fbc14c1b9dbf0f2d7971e9d416c250e",
+  "spec/acceptance/firewall_mss_spec.rb": "7ecdeb039bb6909f40a38c390a6e67b7",
+  "spec/acceptance/firewall_spec.rb": "38b2b7cfd0195a2c2ae3b06062f23767",
+  "spec/acceptance/firewall_tee_spec.rb": "7368aba479809ed89cdb20a038d3a94b",
+  "spec/acceptance/firewall_time_spec.rb": "344c1e8a2a7e175a280c8e1a0d59d1b2",
+  "spec/acceptance/firewall_uid_spec.rb": "d6f6a979e2f84c6c081bc1c102733a44",
+  "spec/acceptance/firewallchain_spec.rb": "f7a27fced0329634445502792ec20f17",
+  "spec/acceptance/invert_spec.rb": "9430d3f5ce52a12f6fed99936e982883",
+  "spec/acceptance/ip6_fragment_spec.rb": "aac19db7a8e77f3f89323ff6e20ebabe",
+  "spec/acceptance/isfragment_spec.rb": "630500c564cc1974f26ae43b2b170152",
+  "spec/acceptance/match_mark_spec.rb": "d3f9df783a0ad28e1626967c4ec1f636",
+  "spec/acceptance/nodesets/centos-59-x64-pe.yml": "255100fb63e3b7c204e24dc9464ae904",
+  "spec/acceptance/nodesets/centos-59-x64.yml": "57eb3e471b9042a8ea40978c467f8151",
+  "spec/acceptance/nodesets/centos-64-x64-fusion.yml": "f5da18ffa623c6a13d9f48521b1bfa39",
+  "spec/acceptance/nodesets/centos-64-x64-pe.yml": "ec075d95760df3d4702abea1ce0a829b",
+  "spec/acceptance/nodesets/centos-64-x64.yml": "092dd2c588a9f87fa1fb12997c0723ef",
+  "spec/acceptance/nodesets/centos-65-x64.yml": "3e5c36e6aa5a690229e720f4048bb8af",
+  "spec/acceptance/nodesets/centos-7-x64.yml": "e7c84aff30c5c42c25817b150c30abb1",
+  "spec/acceptance/nodesets/debian-607-x64.yml": "d566bf76f534e2af7c9a4605316d232c",
+  "spec/acceptance/nodesets/debian-70rc1-x64.yml": "31ccca73af7b74e1cc2fb0035c230b2c",
+  "spec/acceptance/nodesets/default.yml": "092dd2c588a9f87fa1fb12997c0723ef",
+  "spec/acceptance/nodesets/fedora-18-x64.yml": "acc126fa764c39a3b1df36e9224a21d9",
+  "spec/acceptance/nodesets/sles-11sp1-x64.yml": "fa0046bd89c1ab4ba9521ad79db234cd",
+  "spec/acceptance/nodesets/ubuntu-server-10044-x64.yml": "75e86400b7889888dc0781c0ae1a1297",
+  "spec/acceptance/nodesets/ubuntu-server-12042-x64.yml": "d30d73e34cd50b043c7d14e305955269",
+  "spec/acceptance/nodesets/ubuntu-server-1404-x64.yml": "5f0aed10098ac5b78e4217bb27c7aaf0",
+  "spec/acceptance/params_spec.rb": "c291492b77c8ae305bf1ae0975334c2d",
+  "spec/acceptance/purge_spec.rb": "9652105b79554970e6cd0194f46558eb",
+  "spec/acceptance/resource_cmd_spec.rb": "f8a088fa545e1441dfedac22d8f1a2ac",
+  "spec/acceptance/rules_spec.rb": "cc0498256060f210e6dab1e8ef818de6",
+  "spec/acceptance/socket_spec.rb": "3029e0568e818d68c12596a7dfa3d7dc",
+  "spec/acceptance/standard_usage_spec.rb": "599f23e75e50d9bc46983118c6dd085d",
+  "spec/acceptance/unsupported_spec.rb": "5540063193905d4e8235d6042e8633fc",
+  "spec/spec.opts": "a600ded995d948e393fbe2320ba8e51c",
+  "spec/spec_helper.rb": "faae8467928b93bd251a1a66e1eedbe5",
+  "spec/spec_helper_acceptance.rb": "6ffa1f92974e5d0f5315770e065200d0",
+  "spec/unit/classes/firewall_linux_archlinux_spec.rb": "3f9ce56d2069fb971423b3df24de1e3a",
+  "spec/unit/classes/firewall_linux_debian_spec.rb": "03f6a6eb35f8cc30b4932dddae9a8855",
+  "spec/unit/classes/firewall_linux_gentoo_spec.rb": "c23c922f2e07ff25ba9de032cb182983",
+  "spec/unit/classes/firewall_linux_redhat_spec.rb": "09982133c2b3ef91f808a8caea1659c4",
+  "spec/unit/classes/firewall_linux_spec.rb": "3afa99e7ccf71161e1fe0ccda966ed51",
+  "spec/unit/classes/firewall_spec.rb": "60c42500e82bb37ef31a88ad82b9bdd1",
+  "spec/unit/facter/iptables_persistent_version_spec.rb": "c1192cf6b7ffbec614b00e16d5cce0bd",
+  "spec/unit/facter/iptables_spec.rb": "5265be1e6ec652184de8b314ae396d1a",
+  "spec/unit/puppet/provider/ip6tables_spec.rb": "67b945e26f9e31c16fd410818649b072",
+  "spec/unit/puppet/provider/iptables_chain_spec.rb": "8577944053cd2996357358151ef7a530",
+  "spec/unit/puppet/provider/iptables_spec.rb": "fc8404fcfe4bf86a5ee51feb7b54ca54",
+  "spec/unit/puppet/type/firewall_spec.rb": "b2d6da12e4936a3ea003db724f0bf74f",
+  "spec/unit/puppet/type/firewallchain_spec.rb": "28ff0dd5fe0705b5993f5303ef6f7f06",
+  "spec/unit/puppet/util/firewall_spec.rb": "f7d1e4b74561fda330a231fdf973a12e",
+  "spec/unit/puppet/util/ipcidr_spec.rb": "1a6eeb2dd7c9634fcfb60d8ead6e1d79"
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/facter/ip6tables_version.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,11 @@
+Facter.add(:ip6tables_version) do
+  confine :kernel => :linux
+  setcode do
+    version = Facter::Util::Resolution.exec('ip6tables --version')
+    if version
+      version.match(/\d+\.\d+\.\d+/).to_s
+    else
+      nil
+    end
+  end
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/facter/iptables_persistent_version.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,22 @@
+Facter.add(:iptables_persistent_version) do
+  confine :operatingsystem => %w{Debian Ubuntu}
+  setcode do
+    # Throw away STDERR because dpkg >= 1.16.7 will make some noise if the
+    # package isn't currently installed.
+    os = Facter.value(:operatingsystem)
+    os_release = Facter.value(:operatingsystemrelease)
+    if (os == 'Debian' and (Puppet::Util::Package.versioncmp(os_release, '8.0') >= 0)) or
+       (os == 'Ubuntu' and (Puppet::Util::Package.versioncmp(os_release, '14.10') >= 0))
+      cmd = "dpkg-query -Wf '${Version}' netfilter-persistent 2>/dev/null"
+    else
+      cmd = "dpkg-query -Wf '${Version}' iptables-persistent 2>/dev/null"
+    end
+    version = Facter::Util::Resolution.exec(cmd)
+
+    if version.nil? or !version.match(/\d+\.\d+/)
+      nil
+    else
+      version
+    end
+  end
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/facter/iptables_version.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,11 @@
+Facter.add(:iptables_version) do
+  confine :kernel => :linux
+  setcode do
+    version = Facter::Util::Resolution.exec('iptables --version')
+    if version
+      version.match(/\d+\.\d+\.\d+/).to_s
+    else
+      nil
+    end
+  end
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/puppet/provider/firewall.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,34 @@
+class Puppet::Provider::Firewall < Puppet::Provider
+
+  # Prefetch our rule list. This is ran once every time before any other
+  # action (besides initialization of each object).
+  def self.prefetch(resources)
+    debug("[prefetch(resources)]")
+    instances.each do |prov|
+      if resource = resources[prov.name] || resources[prov.name.downcase]
+        resource.provider = prov
+      end
+    end
+  end
+
+  # Look up the current status. This allows us to conventiently look up
+  # existing status with properties[:foo].
+  def properties
+    if @property_hash.empty?
+      @property_hash = query || {:ensure => :absent}
+      @property_hash[:ensure] = :absent if @property_hash.empty?
+    end
+    @property_hash.dup
+  end
+
+  # Pull the current state of the list from the full list.  We're
+  # getting some double entendre here....
+  def query
+    self.class.instances.each do |instance|
+      if instance.name == self.name or instance.name.downcase == self.name
+        return instance.properties
+      end
+    end
+    nil
+  end
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/puppet/provider/firewall/ip6tables.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,224 @@
+Puppet::Type.type(:firewall).provide :ip6tables, :parent => :iptables, :source => :ip6tables do
+  @doc = "Ip6tables type provider"
+
+  has_feature :iptables
+  has_feature :connection_limiting
+  has_feature :hop_limiting
+  has_feature :rate_limiting
+  has_feature :recent_limiting
+  has_feature :snat
+  has_feature :dnat
+  has_feature :interface_match
+  has_feature :icmp_match
+  has_feature :owner
+  has_feature :state_match
+  has_feature :reject_type
+  has_feature :log_level
+  has_feature :log_prefix
+  has_feature :mark
+  has_feature :mss
+  has_feature :tcp_flags
+  has_feature :pkttype
+  has_feature :ishasmorefrags
+  has_feature :islastfrag
+  has_feature :isfirstfrag
+  has_feature :socket
+  has_feature :address_type
+  has_feature :iprange
+  has_feature :ipsec_dir
+  has_feature :ipsec_policy
+  has_feature :mask
+  has_feature :ipset
+
+  optional_commands({
+    :ip6tables      => 'ip6tables',
+    :ip6tables_save => 'ip6tables-save',
+  })
+
+  confine :kernel => :linux
+
+  ip6tables_version = Facter.fact('ip6tables_version').value
+  if (ip6tables_version and Puppet::Util::Package.versioncmp(ip6tables_version, '1.4.1') < 0)
+    mark_flag = '--set-mark'
+  else
+    mark_flag = '--set-xmark'
+  end
+
+
+  def initialize(*args)
+    ip6tables_version = Facter.value('ip6tables_version')
+    if ip6tables_version and ip6tables_version.match /1\.3\.\d/
+      raise ArgumentError, 'The ip6tables provider is not supported on version 1.3 of iptables'
+    else
+      super
+    end
+  end
+
+  def self.iptables(*args)
+    ip6tables(*args)
+  end
+
+  def self.iptables_save(*args)
+    ip6tables_save(*args)
+  end
+
+  @protocol = "IPv6"
+
+  @resource_map = {
+    :burst              => "--limit-burst",
+    :checksum_fill      => "--checksum-fill",
+    :clamp_mss_to_pmtu  => "--clamp-mss-to-pmtu",
+    :connlimit_above    => "-m connlimit --connlimit-above",
+    :connlimit_mask     => "--connlimit-mask",
+    :connmark           => "-m connmark --mark",
+    :ctstate            => "-m conntrack --ctstate",
+    :destination        => "-d",
+    :dport              => ["-m multiport --dports", "--dport"],
+    :dst_range          => '--dst-range',
+    :dst_type           => "--dst-type",
+    :gateway            => "--gateway",
+    :gid                => "--gid-owner",
+    :hop_limit          => "-m hl --hl-eq",
+    :icmp               => "-m icmp6 --icmpv6-type",
+    :iniface            => "-i",
+    :ipsec_dir          => "-m policy --dir",
+    :ipsec_policy       => "--pol",
+    :ipset              => "-m set --match-set",
+    :isfirstfrag        => "-m frag --fragid 0 --fragfirst",
+    :ishasmorefrags     => "-m frag --fragid 0 --fragmore",
+    :islastfrag         => "-m frag --fragid 0 --fraglast",
+    :jump               => "-j",
+    :limit              => "-m limit --limit",
+    :log_level          => "--log-level",
+    :log_prefix         => "--log-prefix",
+    :mask               => "--mask",
+    :match_mark         => "-m mark --mark",
+    :name               => "-m comment --comment",
+    :mac_source         => ["-m mac --mac-source", "--mac-source"],
+    :mss                => "-m tcpmss --mss",
+    :outiface           => "-o",
+    :pkttype            => "-m pkttype --pkt-type",
+    :port               => '-m multiport --ports',
+    :proto              => "-p",
+    :rdest              => "--rdest",
+    :reap               => "--reap",
+    :recent             => "-m recent",
+    :reject             => "--reject-with",
+    :rhitcount          => "--hitcount",
+    :rname              => "--name",
+    :rseconds           => "--seconds",
+    :rsource            => "--rsource",
+    :rttl               => "--rttl",
+    :set_mark           => mark_flag,
+    :set_mss            => '--set-mss',
+    :socket             => "-m socket",
+    :source             => "-s",
+    :sport              => ["-m multiport --sports", "--sport"],
+    :src_range          => '--src-range',
+    :src_type           => "--src-type",
+    :stat_every         => '--every',
+    :stat_mode          => "-m statistic --mode",
+    :stat_packet        => '--packet',
+    :stat_probability   => '--probability',
+    :state              => "-m state --state",
+    :table              => "-t",
+    :tcp_flags          => "-m tcp --tcp-flags",
+    :todest             => "--to-destination",
+    :toports            => "--to-ports",
+    :tosource           => "--to-source",
+    :uid                => "--uid-owner",
+    :physdev_in         => "--physdev-in",
+    :physdev_out        => "--physdev-out",
+    :physdev_is_bridged => "--physdev-is-bridged",
+    :date_start         => "--datestart",
+    :date_stop          => "--datestop",
+    :time_start         => "--timestart",
+    :time_stop          => "--timestop",
+    :month_days         => "--monthdays",
+    :week_days          => "--weekdays",
+    :time_contiguous    => "--contiguous",
+    :kernel_timezone    => "--kerneltz",
+  }
+
+  # These are known booleans that do not take a value, but we want to munge
+  # to true if they exist.
+  @known_booleans = [
+    :checksum_fill,
+    :clamp_mss_to_pmtu,
+    :ishasmorefrags,
+    :islastfrag,
+    :isfirstfrag,
+    :rsource,
+    :rdest,
+    :reap,
+    :rttl,
+    :socket,
+    :physdev_is_bridged,
+    :time_contiguous,
+    :kernel_timezone,
+  ]
+
+  # Properties that use "-m <ipt module name>" (with the potential to have multiple 
+  # arguments against the same IPT module) must be in this hash. The keys in this
+  # hash are the IPT module names, with the values being an array of the respective
+  # supported arguments for this IPT module.
+  #
+  # ** IPT Module arguments must be in order as they would appear in iptables-save **
+  #
+  # Exceptions:
+  #             => multiport: (For some reason, the multiport arguments can't be)
+  #                specified within the same "-m multiport", but works in seperate
+  #                ones.
+  #
+  @module_to_argument_mapping = {
+    :physdev   => [:physdev_in, :physdev_out, :physdev_is_bridged],
+    :addrtype  => [:src_type, :dst_type],
+    :iprange   => [:src_range, :dst_range],
+    :owner     => [:uid, :gid],
+    :time      => [:time_start, :time_stop, :month_days, :week_days, :date_start, :date_stop, :time_contiguous, :kernel_timezone]
+  }
+
+  # Create property methods dynamically
+  (@resource_map.keys << :chain << :table << :action).each do |property|
+    if @known_booleans.include?(property) then
+      # The boolean properties default to '' which should be read as false
+      define_method "#{property}" do
+        @property_hash[property] = :false if @property_hash[property] == nil
+        @property_hash[property.to_sym]
+      end
+    else
+      define_method "#{property}" do
+        @property_hash[property.to_sym]
+      end
+    end
+
+    if property == :chain
+      define_method "#{property}=" do |value|
+        if @property_hash[:chain] != value
+          raise ArgumentError, "Modifying the chain for existing rules is not supported."
+        end
+      end
+    else
+      define_method "#{property}=" do |value|
+        @property_hash[:needs_change] = true
+      end
+    end
+  end
+
+  # This is the order of resources as they appear in iptables-save output,
+  # we need it to properly parse and apply rules, if the order of resource
+  # changes between puppet runs, the changed rules will be re-applied again.
+  # This order can be determined by going through iptables source code or just tweaking and trying manually
+  # (Note: on my CentOS 6.4 ip6tables-save returns -m frag on the place
+  # I put it when calling the command. So compability with manual changes
+  # not provided with current parser [georg.koester])
+  @resource_list = [:table, :source, :destination, :iniface, :outiface, :physdev_in,
+    :physdev_out, :physdev_is_bridged, :proto, :ishasmorefrags, :islastfrag, :isfirstfrag, :src_range, :dst_range,
+    :tcp_flags, :uid, :gid, :mac_source, :sport, :dport, :port, :src_type,
+    :dst_type, :socket, :pkttype, :name, :ipsec_dir, :ipsec_policy, :state,
+    :ctstate, :icmp, :hop_limit, :limit, :burst, :recent, :rseconds, :reap,
+    :rhitcount, :rttl, :rname, :mask, :rsource, :rdest, :ipset, :jump, :clamp_mss_to_pmtu, :gateway, :todest,
+    :tosource, :toports, :checksum_fill, :log_level, :log_prefix, :reject, :set_mss, :mss,
+    :set_mark, :match_mark, :connlimit_above, :connlimit_mask, :connmark, :time_start, :time_stop, :month_days, :week_days, :date_start, :date_stop, :time_contiguous, :kernel_timezone]
+
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/puppet/provider/firewall/iptables.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,669 @@
+require 'puppet/provider/firewall'
+require 'digest/md5'
+
+Puppet::Type.type(:firewall).provide :iptables, :parent => Puppet::Provider::Firewall do
+  include Puppet::Util::Firewall
+
+  @doc = "Iptables type provider"
+
+  has_feature :iptables
+  has_feature :connection_limiting
+  has_feature :rate_limiting
+  has_feature :recent_limiting
+  has_feature :snat
+  has_feature :dnat
+  has_feature :netmap
+  has_feature :interface_match
+  has_feature :icmp_match
+  has_feature :owner
+  has_feature :state_match
+  has_feature :reject_type
+  has_feature :log_level
+  has_feature :log_prefix
+  has_feature :mark
+  has_feature :mss
+  has_feature :tcp_flags
+  has_feature :pkttype
+  has_feature :isfragment
+  has_feature :socket
+  has_feature :address_type
+  has_feature :iprange
+  has_feature :ipsec_dir
+  has_feature :ipsec_policy
+  has_feature :mask
+  has_feature :ipset
+
+  optional_commands({
+    :iptables => 'iptables',
+    :iptables_save => 'iptables-save',
+  })
+
+  defaultfor :kernel => :linux
+  confine :kernel => :linux
+
+  iptables_version = Facter.fact('iptables_version').value
+  if (iptables_version and Puppet::Util::Package.versioncmp(iptables_version, '1.4.1') < 0)
+    mark_flag = '--set-mark'
+  else
+    mark_flag = '--set-xmark'
+  end
+
+  @protocol = "IPv4"
+
+  @resource_map = {
+    :burst              => "--limit-burst",
+    :checksum_fill      => "--checksum-fill",
+    :clamp_mss_to_pmtu  => "--clamp-mss-to-pmtu",
+    :connlimit_above    => "-m connlimit --connlimit-above",
+    :connlimit_mask     => "--connlimit-mask",
+    :connmark           => "-m connmark --mark",
+    :ctstate            => "-m conntrack --ctstate",
+    :destination        => "-d",
+    :dport              => ["-m multiport --dports", "--dport"],
+    :dst_range          => "--dst-range",
+    :dst_type           => "--dst-type",
+    :gateway            => "--gateway",
+    :gid                => "--gid-owner",
+    :icmp               => "-m icmp --icmp-type",
+    :iniface            => "-i",
+    :ipsec_dir          => "-m policy --dir",
+    :ipsec_policy       => "--pol",
+    :ipset              => "-m set --match-set",
+    :isfragment         => "-f",
+    :jump               => "-j",
+    :limit              => "-m limit --limit",
+    :log_level          => "--log-level",
+    :log_prefix         => "--log-prefix",
+    :mac_source         => ["-m mac --mac-source", "--mac-source"],
+    :mask               => '--mask',
+    :match_mark         => "-m mark --mark",
+    :mss                => '-m tcpmss --mss',
+    :name               => "-m comment --comment",
+    :outiface           => "-o",
+    :pkttype            => "-m pkttype --pkt-type",
+    :port               => '-m multiport --ports',
+    :proto              => "-p",
+    :random             => "--random",
+    :rdest              => "--rdest",
+    :reap               => "--reap",
+    :recent             => "-m recent",
+    :reject             => "--reject-with",
+    :rhitcount          => "--hitcount",
+    :rname              => "--name",
+    :rseconds           => "--seconds",
+    :rsource            => "--rsource",
+    :rttl               => "--rttl",
+    :set_mark           => mark_flag,
+    :set_mss            => '--set-mss',
+    :socket             => "-m socket",
+    :source             => "-s",
+    :sport              => ["-m multiport --sports", "--sport"],
+    :src_range          => "--src-range",
+    :src_type           => "--src-type",
+    :stat_every         => '--every',
+    :stat_mode          => "-m statistic --mode",
+    :stat_packet        => '--packet',
+    :stat_probability   => '--probability',
+    :state              => "-m state --state",
+    :table              => "-t",
+    :tcp_flags          => "-m tcp --tcp-flags",
+    :todest             => "--to-destination",
+    :toports            => "--to-ports",
+    :tosource           => "--to-source",
+    :to                 => "--to",
+    :uid                => "--uid-owner",
+    :physdev_in         => "--physdev-in",
+    :physdev_out        => "--physdev-out",
+    :physdev_is_bridged => "--physdev-is-bridged",
+    :date_start         => "--datestart",
+    :date_stop          => "--datestop",
+    :time_start         => "--timestart",
+    :time_stop          => "--timestop",
+    :month_days         => "--monthdays",
+    :week_days          => "--weekdays",
+    :time_contiguous    => "--contiguous",
+    :kernel_timezone    => "--kerneltz",
+  }
+
+  # These are known booleans that do not take a value, but we want to munge
+  # to true if they exist.
+  @known_booleans = [
+    :checksum_fill,
+    :clamp_mss_to_pmtu,
+    :isfragment,
+    :random,
+    :rdest,
+    :reap,
+    :rsource,
+    :rttl,
+    :socket,
+    :physdev_is_bridged,
+    :time_contiguous,
+    :kernel_timezone,
+  ]
+
+  # Properties that use "-m <ipt module name>" (with the potential to have multiple 
+  # arguments against the same IPT module) must be in this hash. The keys in this
+  # hash are the IPT module names, with the values being an array of the respective
+  # supported arguments for this IPT module.
+  #
+  # ** IPT Module arguments must be in order as they would appear in iptables-save **
+  #
+  # Exceptions:
+  #             => multiport: (For some reason, the multiport arguments can't be)
+  #                specified within the same "-m multiport", but works in seperate
+  #                ones.
+  #
+  @module_to_argument_mapping = {
+    :physdev   => [:physdev_in, :physdev_out, :physdev_is_bridged],
+    :addrtype  => [:src_type, :dst_type],
+    :iprange   => [:src_range, :dst_range],
+    :owner     => [:uid, :gid],
+    :time      => [:time_start, :time_stop, :month_days, :week_days, :date_start, :date_stop, :time_contiguous, :kernel_timezone]
+  }
+
+  def self.munge_resource_map_from_existing_values(resource_map_original, compare)
+    resource_map_new = resource_map_original.clone
+
+    @module_to_argument_mapping.each do |ipt_module, arg_array|
+      arg_array.each do |argument|
+        if resource_map_original[argument].is_a?(Array)
+          if compare.include?(resource_map_original[argument].first)
+            resource_map_new[argument] = resource_map_original[argument].clone
+            resource_map_new[argument][0] = "-m #{ipt_module.to_s} #{resource_map_original[argument].first}"
+            break
+          end
+        else
+          if compare.include?(resource_map_original[argument])
+            resource_map_new[argument] = "-m #{ipt_module.to_s} #{resource_map_original[argument]}"
+            break
+          end
+        end
+      end
+    end
+    resource_map_new
+  end
+
+  def munge_resource_map_from_resource(resource_map_original, compare)
+    resource_map_new = resource_map_original.clone
+    module_to_argument_mapping = self.class.instance_variable_get('@module_to_argument_mapping')
+
+    module_to_argument_mapping.each do |ipt_module, arg_array|
+      arg_array.each do |argument|
+        if compare[argument]
+          if resource_map_original[argument].is_a?(Array)
+            resource_map_new[argument] = resource_map_original[argument].clone
+            resource_map_new[argument][0] = "-m #{ipt_module.to_s} #{resource_map_original[argument].first}"
+          else
+            resource_map_new[argument] = "-m #{ipt_module.to_s} #{resource_map_original[argument]}"
+          end
+          break
+        end
+      end
+    end
+    resource_map_new
+  end
+
+
+  # Create property methods dynamically
+  (@resource_map.keys << :chain << :table << :action).each do |property|
+    if @known_booleans.include?(property) then
+      # The boolean properties default to '' which should be read as false
+      define_method "#{property}" do
+        @property_hash[property] = :false if @property_hash[property] == nil
+        @property_hash[property.to_sym]
+      end
+    else
+      define_method "#{property}" do
+        @property_hash[property.to_sym]
+      end
+    end
+
+    if property == :chain
+      define_method "#{property}=" do |value|
+        if @property_hash[:chain] != value
+          raise ArgumentError, "Modifying the chain for existing rules is not supported."
+        end
+      end
+    else
+      define_method "#{property}=" do |value|
+        @property_hash[:needs_change] = true
+      end
+    end
+  end
+
+  # This is the order of resources as they appear in iptables-save output,
+  # we need it to properly parse and apply rules, if the order of resource
+  # changes between puppet runs, the changed rules will be re-applied again.
+  # This order can be determined by going through iptables source code or just tweaking and trying manually
+  @resource_list = [
+    :table, :source, :destination, :iniface, :outiface, :physdev_in, :physdev_out, :physdev_is_bridged, :proto, :isfragment,
+    :stat_mode, :stat_every, :stat_packet, :stat_probability,
+    :src_range, :dst_range, :tcp_flags, :uid, :gid, :mac_source, :sport, :dport, :port,
+    :src_type, :dst_type, :socket, :pkttype, :name, :ipsec_dir, :ipsec_policy,
+    :state, :ctstate, :icmp, :limit, :burst, :recent, :rseconds, :reap,
+    :rhitcount, :rttl, :rname, :mask, :rsource, :rdest, :ipset, :jump, :clamp_mss_to_pmtu, :gateway, :set_mss, :todest,
+    :tosource, :toports, :to, :checksum_fill, :random, :log_prefix, :log_level, :reject, :set_mark, :match_mark, :mss,
+    :connlimit_above, :connlimit_mask, :connmark, :time_start, :time_stop, :month_days, :week_days, :date_start, :date_stop, :time_contiguous, :kernel_timezone
+  ]
+
+  def insert
+    debug 'Inserting rule %s' % resource[:name]
+    iptables insert_args
+  end
+
+  def update
+    debug 'Updating rule %s' % resource[:name]
+    iptables update_args
+  end
+
+  def delete
+    debug 'Deleting rule %s' % resource[:name]
+    iptables delete_args
+  end
+
+  def exists?
+    properties[:ensure] != :absent
+  end
+
+  # Flush the property hash once done.
+  def flush
+    debug("[flush]")
+    if @property_hash.delete(:needs_change)
+      notice("Properties changed - updating rule")
+      update
+    end
+    persist_iptables(self.class.instance_variable_get(:@protocol))
+    @property_hash.clear
+  end
+
+  def self.instances
+    debug "[instances]"
+    table = nil
+    rules = []
+    counter = 1
+
+    # String#lines would be nice, but we need to support Ruby 1.8.5
+    iptables_save.split("\n").each do |line|
+      unless line =~ /^\#\s+|^\:\S+|^COMMIT|^FATAL/
+        if line =~ /^\*/
+          table = line.sub(/\*/, "")
+        else
+          if hash = rule_to_hash(line, table, counter)
+            rules << new(hash)
+            counter += 1
+          end
+        end
+      end
+    end
+    rules
+  end
+
+  def self.rule_to_hash(line, table, counter)
+    hash = {}
+    keys = []
+    values = line.dup
+
+    ####################
+    # PRE-PARSE CLUDGING
+    ####################
+
+    # --tcp-flags takes two values; we cheat by adding " around it
+    # so it behaves like --comment
+    values = values.gsub(/(!\s+)?--tcp-flags (\S*) (\S*)/, '--tcp-flags "\1\2 \3"')
+    # ditto for --match-set
+    values = values.sub(/(!\s+)?--match-set (\S*) (\S*)/, '--match-set "\1\2 \3"')
+    # we do a similar thing for negated address masks (source and destination).
+    values = values.gsub(/(-\S+) (!)\s?(\S*)/,'\1 "\2 \3"')
+    # the actual rule will have the ! mark before the option.
+    values = values.gsub(/(!)\s*(-\S+)\s*(\S*)/, '\2 "\1 \3"')
+    # The match extension for tcp & udp are optional and throws off the @resource_map.
+    values = values.gsub(/(?!-m tcp --tcp-flags)-m (tcp|udp) /, '')
+    # '--pol ipsec' takes many optional arguments; we cheat again by adding " around them
+    values = values.sub(/
+        --pol\sipsec
+        (\s--strict)?
+        (\s--reqid\s\S+)?
+        (\s--spi\s\S+)?
+        (\s--proto\s\S+)?
+        (\s--mode\s\S+)?
+        (\s--tunnel-dst\s\S+)?
+        (\s--tunnel-src\s\S+)?
+        (\s--next)?/x,
+        '--pol "ipsec\1\2\3\4\5\6\7\8" '
+    )
+
+    resource_map = munge_resource_map_from_existing_values(@resource_map, values)
+
+    # Trick the system for booleans
+    @known_booleans.each do |bool|
+      # append "true" because all params are expected to have values
+      if bool == :isfragment then
+        # -f requires special matching:
+        # only replace those -f that are not followed by an l to
+        # distinguish between -f and the '-f' inside of --tcp-flags.
+        values = values.sub(/-f(?!l)(?=.*--comment)/, '-f true')
+      else
+        values = values.sub(/#{resource_map[bool]}/, "#{resource_map[bool]} true")
+      end
+    end
+
+    ############
+    # Populate parser_list with used value, in the correct order
+    ############
+    map_index={}
+    resource_map.each_pair do |map_k,map_v|
+      [map_v].flatten.each do |v|
+        ind=values.index(/\s#{v}\s/)
+        next unless ind
+        map_index[map_k]=ind
+     end
+    end
+    # Generate parser_list based on the index of the found option
+    parser_list=[]
+    map_index.sort_by{|k,v| v}.each{|mapi| parser_list << mapi.first }
+
+    ############
+    # MAIN PARSE
+    ############
+
+    # Here we iterate across our values to generate an array of keys
+    parser_list.reverse.each do |k|
+      resource_map_key = resource_map[k]
+      [resource_map_key].flatten.each do |opt|
+        if values.slice!(/\s#{opt}/)
+          keys << k
+          break
+        end
+      end
+    end
+
+    # Manually remove chain
+    values.slice!('-A')
+    keys << :chain
+
+    # Here we generate the main hash
+    keys.zip(values.scan(/"[^"]*"|\S+/).reverse) { |f, v| hash[f] = v.gsub(/"/, '') }
+
+    #####################
+    # POST PARSE CLUDGING
+    #####################
+
+    [:dport, :sport, :port, :state, :ctstate].each do |prop|
+      hash[prop] = hash[prop].split(',') if ! hash[prop].nil?
+    end
+
+    # Convert booleans removing the previous cludge we did
+    @known_booleans.each do |bool|
+      if hash[bool] != nil then
+        if hash[bool] != "true" then
+          raise "Parser error: #{bool} was meant to be a boolean but received value: #{hash[bool]}."
+        end
+      end
+    end
+
+    # Our type prefers hyphens over colons for ranges so ...
+    # Iterate across all ports replacing colons with hyphens so that ranges match
+    # the types expectations.
+    [:dport, :sport, :port].each do |prop|
+      next unless hash[prop]
+      hash[prop] = hash[prop].collect do |elem|
+        elem.gsub(/:/,'-')
+      end
+    end
+
+    # Invert any rules that are prefixed with a '!'
+    [
+      :connmark,
+      :ctstate,
+      :destination,
+      :dport,
+      :dst_range,
+      :dst_type,
+      :ipset,
+      :port,
+      :proto,
+      :source,
+      :sport,
+      :src_range,
+      :src_type,
+      :state,
+    ].each do |prop|
+      if hash[prop] and hash[prop].is_a?(Array)
+        # find if any are negated, then negate all if so
+        should_negate = hash[prop].index do |value|
+          value.match(/^(!)\s+/)
+        end
+        hash[prop] = hash[prop].collect { |v|
+          "! #{v.sub(/^!\s+/,'')}"
+        } if should_negate
+      elsif hash[prop]
+        m = hash[prop].match(/^(!?)\s?(.*)/)
+        neg = "! " if m[1] == "!"
+        if [:source,:destination].include?(prop)
+          # Normalise all rules to CIDR notation.
+          hash[prop] = "#{neg}#{Puppet::Util::IPCidr.new(m[2]).cidr}"
+        else
+          hash[prop] = "#{neg}#{m[2]}"
+        end
+      end
+    end
+
+    # States should always be sorted. This ensures that the output from
+    # iptables-save and user supplied resources is consistent.
+    hash[:state]   = hash[:state].sort   unless hash[:state].nil?
+    hash[:ctstate] = hash[:ctstate].sort unless hash[:ctstate].nil?
+
+    # This forces all existing, commentless rules or rules with invalid comments to be moved
+    # to the bottom of the stack.
+    # Puppet-firewall requires that all rules have comments (resource names) and match this
+    # regex and will fail if a rule in iptables does not have a comment. We get around this
+    # by appending a high level
+    if ! hash[:name]
+      num = 9000 + counter
+      hash[:name] = "#{num} #{Digest::MD5.hexdigest(line)}"
+    elsif not /^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/ =~ hash[:name]
+      num = 9000 + counter
+      hash[:name] = "#{num} #{/([[:alpha:][:digit:][:punct:][:space:]]+)/.match(hash[:name])[1]}"
+    end
+
+    # Iptables defaults to log_level '4', so it is omitted from the output of iptables-save.
+    # If the :jump value is LOG and you don't have a log-level set, we assume it to be '4'.
+    if hash[:jump] == 'LOG' && ! hash[:log_level]
+      hash[:log_level] = '4'
+    end
+
+    # Iptables defaults to burst '5', so it is ommitted from the output of iptables-save.
+    # If the :limit value is set and you don't have a burst set, we assume it to be '5'.
+    if hash[:limit] && ! hash[:burst]
+      hash[:burst] = '5'
+    end
+
+    hash[:line] = line
+    hash[:provider] = self.name.to_s
+    hash[:table] = table
+    hash[:ensure] = :present
+
+    # Munge some vars here ...
+
+    # Proto should equal 'all' if undefined
+    hash[:proto] = "all" if !hash.include?(:proto)
+
+    # If the jump parameter is set to one of: ACCEPT, REJECT or DROP then
+    # we should set the action parameter instead.
+    if ['ACCEPT','REJECT','DROP'].include?(hash[:jump]) then
+      hash[:action] = hash[:jump].downcase
+      hash.delete(:jump)
+    end
+
+    hash
+  end
+
+  def insert_args
+    args = []
+    args << ["-I", resource[:chain], insert_order]
+    args << general_args
+    args
+  end
+
+  def update_args
+    args = []
+    args << ["-R", resource[:chain], insert_order]
+    args << general_args
+    args
+  end
+
+  def delete_args
+    # Split into arguments
+    line = properties[:line].gsub(/\-A /, '-D ').split(/\s(?=(?:[^"]|"[^"]*")*$)/).map{|v| v.gsub(/"/, '')}
+    line.unshift("-t", properties[:table])
+  end
+
+  # This method takes the resource, and attempts to generate the command line
+  # arguments for iptables.
+  def general_args
+    debug "Current resource: %s" % resource.class
+
+    args = []
+    resource_list = self.class.instance_variable_get('@resource_list')
+    known_booleans = self.class.instance_variable_get('@known_booleans')
+    resource_map = self.class.instance_variable_get('@resource_map')
+    resource_map = munge_resource_map_from_resource(resource_map, resource)
+
+    resource_list.each do |res|
+      resource_value = nil
+      if (resource[res]) then
+        resource_value = resource[res]
+        # If socket is true then do not add the value as -m socket is standalone
+        if known_booleans.include?(res) then
+          if resource[res] == :true then
+            resource_value = nil
+          else
+            # If the property is not :true then we don't want to add the value
+            # to the args list
+            next
+          end
+        end
+      elsif res == :jump and resource[:action] then
+        # In this case, we are substituting jump for action
+        resource_value = resource[:action].to_s.upcase
+      else
+        next
+      end
+
+      args << [resource_map[res]].flatten.first.split(' ')
+      args = args.flatten
+
+      # On negations, the '!' has to be before the option (eg: "! -d 1.2.3.4")
+      if resource_value.is_a?(String) and resource_value.sub!(/^!\s*/, '') then
+        # we do this after adding the 'dash' argument because of ones like "-m multiport --dports", where we want it before the "--dports" but after "-m multiport".
+        # so we insert before whatever the last argument is
+        args.insert(-2, '!')
+      elsif resource_value.is_a?(Symbol) and resource_value.to_s.match(/^!/) then
+        #ruby 1.8.7 can't .match Symbols ------------------ ^
+        resource_value = resource_value.to_s.sub!(/^!\s*/, '').to_sym
+        args.insert(-2, '!')
+      elsif resource_value.is_a?(Array)
+        should_negate = resource_value.index do |value|
+          #ruby 1.8.7 can't .match symbols
+          value.to_s.match(/^(!)\s+/)
+        end
+        if should_negate
+          resource_value, wrong_values = resource_value.collect do |value|
+            if value.is_a?(String)
+              wrong = value if ! value.match(/^!\s+/)
+              [value.sub(/^!\s*/, ''),wrong]
+            else
+              [value,nil]
+            end
+          end.transpose
+          wrong_values = wrong_values.compact
+          if ! wrong_values.empty?
+            fail "All values of the '#{res}' property must be prefixed with a '!' when inverting, but '#{wrong_values.join("', '")}' #{wrong_values.length>1?"are":"is"} not prefixed; aborting"
+          end
+          args.insert(-2, '!')
+        end
+      end
+
+
+      # For sport and dport, convert hyphens to colons since the type
+      # expects hyphens for ranges of ports.
+      if [:sport, :dport, :port].include?(res) then
+        resource_value = resource_value.collect do |elem|
+          elem.gsub(/-/, ':')
+        end
+      end
+
+      # our tcp_flags takes a single string with comma lists separated
+      # by space
+      # --tcp-flags expects two arguments
+      if res == :tcp_flags or res == :ipset
+        one, two = resource_value.split(' ')
+        args << one
+        args << two
+      elsif resource_value.is_a?(Array)
+        args << resource_value.join(',')
+      elsif !resource_value.nil?
+        args << resource_value
+      end
+    end
+
+    args
+  end
+
+  def insert_order
+    debug("[insert_order]")
+    rules = []
+
+    # Find list of current rules based on chain and table
+    self.class.instances.each do |rule|
+      if rule.chain == resource[:chain].to_s and rule.table == resource[:table].to_s
+        rules << rule.name
+      end
+    end
+
+    # No rules at all? Just bail now.
+    return 1 if rules.empty?
+
+    # Add our rule to the end of the array of known rules
+    my_rule = resource[:name].to_s
+    rules << my_rule
+
+    unmanaged_rule_regex = /^9[0-9]{3}\s[a-f0-9]{32}$/
+    # Find if this is a new rule or an existing rule, then find how many
+    # unmanaged rules preceed it.
+    if rules.length == rules.uniq.length
+      # This is a new rule so find its ordered location.
+      new_rule_location = rules.sort.uniq.index(my_rule)
+      if new_rule_location == 0
+        # The rule will be the first rule in the chain because nothing came
+        # before it.
+        offset_rule = rules[0]
+      else
+        # This rule will come after other managed rules, so find the rule
+        # immediately preceeding it.
+        offset_rule = rules.sort.uniq[new_rule_location - 1]
+      end
+    else
+      # This is a pre-existing rule, so find the offset from the original
+      # ordering.
+      offset_rule = my_rule
+    end
+    # Count how many unmanaged rules are ahead of the target rule so we know
+    # how much to add to the insert order
+    unnamed_offset = rules[0..rules.index(offset_rule)].inject(0) do |sum,rule|
+      # This regex matches the names given to unmanaged rules (a number
+      # 9000-9999 followed by an MD5 hash).
+      sum + (rule.match(unmanaged_rule_regex) ? 1 : 0)
+    end
+
+    # We want our rule to come before unmanaged rules if it's not a 9-rule
+    if offset_rule.match(unmanaged_rule_regex) and ! my_rule.match(/^9/)
+      unnamed_offset -= 1
+    end
+
+    # Insert our new or updated rule in the correct order of named rules, but
+    # offset for unnamed rules.
+    rules.reject{|r|r.match(unmanaged_rule_regex)}.sort.index(my_rule) + 1 + unnamed_offset
+  end
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/puppet/provider/firewallchain/iptables_chain.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,179 @@
+Puppet::Type.type(:firewallchain).provide :iptables_chain do
+  include Puppet::Util::Firewall
+
+  @doc = "Iptables chain provider"
+
+  has_feature :iptables_chain
+  has_feature :policy
+
+  optional_commands({
+    :iptables       => 'iptables',
+    :iptables_save  => 'iptables-save',
+    :ip6tables      => 'ip6tables',
+    :ip6tables_save => 'ip6tables-save',
+    :ebtables       => 'ebtables',
+    :ebtables_save  => 'ebtables-save',
+  })
+
+  defaultfor :kernel => :linux
+  confine :kernel => :linux
+
+  # chain name is greedy so we anchor from the end.
+  # [\d+:\d+] doesn't exist on ebtables
+  Mapping = {
+    :IPv4 => {
+      :tables => method(:iptables),
+      :save   => method(:iptables_save),
+      :re     => /^:(.+)\s(\S+)\s\[\d+:\d+\]$/,
+    },
+    :IPv6 => {
+      :tables => method(:ip6tables),
+      :save   => method(:ip6tables_save),
+      :re     => /^:(.+)\s(\S+)\s\[\d+:\d+\]$/,
+    },
+    :ethernet => {
+      :tables => method(:ebtables),
+      :save   => method(:ebtables_save),
+      :re     => /^:(.+)\s(\S+)$/,
+    }
+  }
+  InternalChains = /^(PREROUTING|POSTROUTING|BROUTING|INPUT|FORWARD|OUTPUT)$/
+  Tables = 'nat|mangle|filter|raw|rawpost|broute'
+  Nameformat = /^(.+):(#{Tables}):(IP(v[46])?|ethernet)$/
+
+  def create
+    allvalidchains do |t, chain, table, protocol|
+      if chain =~ InternalChains
+        # can't create internal chains
+        warning "Attempting to create internal chain #{@resource[:name]}"
+      end
+      if properties[:ensure] == protocol
+        debug "Skipping Inserting chain #{chain} on table #{table} (#{protocol}) already exists"
+      else
+        debug "Inserting chain #{chain} on table #{table} (#{protocol}) using #{t}"
+        t.call ['-t',table,'-N',chain]
+        unless @resource[:policy].nil?
+          t.call ['-t',table,'-P',chain,@resource[:policy].to_s.upcase]
+        end
+      end
+    end
+  end
+
+  def destroy
+    allvalidchains do |t, chain, table|
+      if chain =~ InternalChains
+        # can't delete internal chains
+        warning "Attempting to destroy internal chain #{@resource[:name]}"
+      end
+      debug "Deleting chain #{chain} on table #{table}"
+      t.call ['-t',table,'-X',chain]
+    end
+  end
+
+  def exists?
+    allvalidchains do |t, chain|
+      if chain =~ InternalChains
+        # If the chain isn't present, it's likely because the module isn't loaded.
+        # If this is true, then we fall into 2 cases
+        # 1) It'll be loaded on demand
+        # 2) It won't be loaded on demand, and we throw an error
+        #    This is the intended behavior as it's not the provider's job to load kernel modules
+        # So we pretend it exists...
+        return true
+      end
+    end
+    properties[:ensure] == :present
+  end
+
+  def policy=(value)
+    return if value == :empty
+    allvalidchains do |t, chain, table|
+      p = ['-t',table,'-P',chain,value.to_s.upcase]
+      debug "[set policy] #{t} #{p}"
+      t.call p
+    end
+  end
+
+  def policy
+    debug "[get policy] #{@resource[:name]} =#{@property_hash[:policy].to_s.downcase}"
+    return @property_hash[:policy].to_s.downcase
+  end
+
+  def self.prefetch(resources)
+    debug("[prefetch(resources)]")
+    instances.each do |prov|
+      if resource = resources[prov.name]
+        resource.provider = prov
+      end
+    end
+  end
+
+  def flush
+    debug("[flush]")
+    persist_iptables(@resource[:name].match(Nameformat)[3])
+    # Clear the property hash so we re-initialize with updated values
+    @property_hash.clear
+  end
+
+  # Look up the current status. This allows us to conventiently look up
+  # existing status with properties[:foo].
+  def properties
+    if @property_hash.empty?
+      @property_hash = query || {:ensure => :absent}
+    end
+    @property_hash.dup
+  end
+
+  # Pull the current state of the list from the full list.
+  def query
+    self.class.instances.each do |instance|
+      if instance.name == self.name
+        debug "query found #{self.name}" % instance.properties.inspect
+        return instance.properties
+      end
+    end
+    nil
+  end
+
+  def self.instances
+    debug "[instances]"
+    table = nil
+    chains = []
+
+    Mapping.each { |p, c|
+      begin
+        c[:save].call.each_line do |line|
+          if line =~ c[:re] then
+            name = $1 + ':' + (table == 'filter' ? 'filter' : table) + ':' + p.to_s
+            policy = $2 == '-' ? nil : $2.downcase.to_sym
+
+            chains << new({
+              :name   => name,
+              :policy => policy,
+              :ensure => :present,
+            })
+
+            debug "[instance] '#{name}' #{policy}"
+          elsif line =~ /^\*(\S+)/
+            table = $1
+          else
+            next
+          end
+        end
+      rescue Puppet::Error
+        # ignore command not found for ebtables or anything that doesn't exist
+      end
+    }
+
+    chains
+  end
+
+  def allvalidchains
+    @resource[:name].match(Nameformat)
+    chain = $1
+    table = $2
+    protocol = $3
+    yield Mapping[protocol.to_sym][:tables],chain,table,protocol.to_sym
+  end
+
+end

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modules/firewall/lib/puppet/type/firewall.rb	Sat Mar 14 20:58:03 2015 +0000
@@ -0,0 +1,1436 @@
+# See: #10295 for more details.
+#
+# This is a workaround for bug: #4248 whereby ruby files outside of the normal
+# provider/type path do not load until pluginsync has occured on the puppetmaster
+#
+# In this case I'm trying the relative path first, then falling back to normal
+# mechanisms. This should be fixed in future versions of puppet but it looks
+# like we'll need to maintain this for some time perhaps.
+$LOAD_PATH.unshift(File.join(File.dirname(__FILE__),"..",".."))
+require 'puppet/util/firewall'
+
+Puppet::Type.newtype(:firewall) do
+  include Puppet::Util::Firewall
+
+  @doc = <<-EOS
+    This type provides the capability to manage firewall rules within
+    puppet.
+
+    **Autorequires:**
+
+    If Puppet is managing the iptables or ip6tables chains specified in the
+    `chain` or `jump` parameters, the firewall resource will autorequire
+    those firewallchain resources.
+
+    If Puppet is managing the iptables, iptables-persistent, or iptables-services packages,
+    and the provider is iptables or ip6tables, the firewall resource will
+    autorequire those packages to ensure that any required binaries are
+    installed.
+  EOS
+
+  feature :connection_limiting, "Connection limiting features."
+  feature :hop_limiting, "Hop limiting features."
+  feature :rate_limiting, "Rate limiting features."
+  feature :recent_limiting, "The netfilter recent module"
+  feature :snat, "Source NATing"
+  feature :dnat, "Destination NATing"
+  feature :netmap, "NET MAPping"
+  feature :interface_match, "Interface matching"
+  feature :icmp_match, "Matching ICMP types"
+  feature :owner, "Matching owners"
+  feature :state_match, "Matching stateful firewall states"
+  feature :reject_type, "The ability to control reject messages"
+  feature :log_level, "The ability to control the log level"
+  feature :log_prefix, "The ability to add prefixes to log messages"
+  feature :mark, "Match or Set the netfilter mark value associated with the packet"
+  feature :mss, "Match a given TCP MSS value or range."
+  feature :tcp_flags, "The ability to match on particular TCP flag settings"
+  feature :pkttype, "Match a packet type"
+  feature :socket, "Match open sockets"
+  feature :isfragment, "Match fragments"
+  feature :address_type, "The ability match on source or destination address type"
+  feature :iprange, "The ability match on source or destination IP range "
+  feature :ishasmorefrags, "Match a non-last fragment of a fragmented ipv6 packet - might be first"
+  feature :islastfrag, "Match the last fragment of an ipv6 packet"
+  feature :isfirstfrag, "Match the first fragment of a fragmented ipv6 packet"
+  feature :ipsec_policy, "Match IPsec policy"
+  feature :ipsec_dir, "Match IPsec policy direction"
+  feature :mask, "Ability to match recent rules based on the ipv4 mask"
+  feature :ipset, "Match against specified ipset list"
+
+  # provider specific features
+  feature :iptables, "The provider provides iptables features."
+
+  ensurable do
+    desc <<-EOS
+      Manage the state of this rule. The default action is *present*.
+    EOS
+
+    newvalue(:present) do
+      provider.insert
+    end
+
+    newvalue(:absent) do
+      provider.delete
+    end
+
+    defaultto :present
+  end
+
+  newparam(:name) do
+    desc <<-EOS
+      The canonical name of the rule. This name is also used for ordering
+      so make sure you prefix the rule with a number:
+
+          000 this runs first
+          999 this runs last
+
+      Depending on the provider, the name of the rule can be stored using
+      the comment feature of the underlying firewall subsystem.
+    EOS
+    isnamevar
+
+    # Keep rule names simple - they must start with a number
+    newvalues(/^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/)
+  end
+
+  newproperty(:action) do
+    desc <<-EOS
+      This is the action to perform on a match. Can be one of:
+
+      * accept - the packet is accepted
+      * reject - the packet is rejected with a suitable ICMP response
+      * drop - the packet is dropped
+
+      If you specify no value it will simply match the rule but perform no
+      action unless you provide a provider specific parameter (such as *jump*).
+    EOS
+    newvalues(:accept, :reject, :drop)
+  end
+
+  # Generic matching properties
+  newproperty(:source) do
+    desc <<-EOS
+      The source address. For example:
+
+          source => '192.168.2.0/24'
+
+      You can also negate a mask by putting ! in front. For example:
+
+          source => '! 192.168.2.0/24'
+
+      The source can also be an IPv6 address if your provider supports it.
+    EOS
+
+    munge do |value|
+      begin
+        @resource.host_to_mask(value)
+      rescue Exception => e
+        self.fail("host_to_ip failed for #{value}, exception #{e}")
+      end
+    end
+  end
+
+  # Source IP range
+  newproperty(:src_range, :required_features => :iprange) do
+    desc <<-EOS
+      The source IP range. For example:
+
+          src_range => '192.168.1.1-192.168.1.10'
+
+      The source IP range must be in 'IP1-IP2' format.
+    EOS
+
+    validate do |value|
+      if matches = /^([^\-\/]+)-([^\-\/]+)$/.match(value)
+        start_addr = matches[1]
+        end_addr = matches[2]
+
+        [start_addr, end_addr].each do |addr|
+          begin
+            @resource.host_to_ip(addr)
+          rescue Exception
+            self.fail("Invalid IP address \"#{addr}\" in range \"#{value}\"")
+          end
+        end
+      else
+        raise(ArgumentError, "The source IP range must be in 'IP1-IP2' format.")
+      end
+    end
+  end
+
+  newproperty(:destination) do
+    desc <<-EOS
+      The destination address to match. For example:
+
+          destination => '192.168.1.0/24'
+
+      You can also negate a mask by putting ! in front. For example:
+
+          destination  => '! 192.168.2.0/24'
+
+      The destination can also be an IPv6 address if your provider supports it.
+    EOS
+
+    munge do |value|
+      begin
+        @resource.host_to_mask(value)
+      rescue Exception => e
+        self.fail("host_to_ip failed for #{value}, exception #{e}")
+      end
+    end
+  end
+
+  # Destination IP range
+  newproperty(:dst_range, :required_features => :iprange) do
+    desc <<-EOS
+      The destination IP range. For example:
+
+          dst_range => '192.168.1.1-192.168.1.10'
+
+      The destination IP range must be in 'IP1-IP2' format.
+    EOS
+
+    validate do |value|
+      if matches = /^([^\-\/]+)-([^\-\/]+)$/.match(value)
+        start_addr = matches[1]
+        end_addr = matches[2]
+
+        [start_addr, end_addr].each do |addr|
+          begin
+            @resource.host_to_ip(addr)
+          rescue Exception
+            self.fail("Invalid IP address \"#{addr}\" in range \"#{value}\"")
+          end
+        end
+      else
+        raise(ArgumentError, "The destination IP range must be in 'IP1-IP2' format.")
+      end
+    end
+  end
+
+  newproperty(:sport, :array_matching => :all) do
+    desc <<-EOS
+      The source port to match for this filter (if the protocol supports
+      ports). Will accept a single element or an array.
+
+      For some firewall providers you can pass a range of ports in the format:
+
+          <start_number>-<ending_number>
+
+      For example:
+
+          1-1024
+
+      This would cover ports 1 to 1024.
+    EOS
+
+    munge do |value|
+      @resource.string_to_port(value, :proto)
+    end
+
+    def is_to_s(value)
+      should_to_s(value)
+    end
+
+    def should_to_s(value)
+      value = [value] unless value.is_a?(Array)
+      value.join(',')
+    end
+  end
+
+  newproperty(:dport, :array_matching => :all) do
+    desc <<-EOS
+      The destination port to match for this filter (if the protocol supports
+      ports). Will accept a single element or an array.
+
+      For some firewall providers you can pass a range of ports in the format:
+
+          <start_number>-<ending_number>
+
+      For example:
+
+          1-1024
+
+      This would cover ports 1 to 1024.
+    EOS
+
+    munge do |value|
+      @resource.string_to_port(value, :proto)
+    end
+
+    def is_to_s(value)
+      should_to_s(value)
+    end
+
+    def should_to_s(value)
+      value = [value] unless value.is_a?(Array)
+      value.join(',')
+    end
+  end
+
+  newproperty(:port, :array_matching => :all) do
+    desc <<-EOS
+      The destination or source port to match for this filter (if the protocol
+      supports ports). Will accept a single element or an array.
+
+      For some firewall providers you can pass a range of ports in the format:
+
+          <start_number>-<ending_number>
+
+      For example:
+
+          1-1024
+
+      This would cover ports 1 to 1024.
+    EOS
+
+    munge do |value|
+      @resource.string_to_port(value, :proto)
+    end
+
+    def is_to_s(value)
+      should_to_s(value)
+    end
+
+    def should_to_s(value)
+      value = [value] unless value.is_a?(Array)
+      value.join(',')
+    end
+  end
+
+  newproperty(:dst_type, :required_features => :address_type) do
+    desc <<-EOS
+      The destination address type. For example:
+
+          dst_type => 'LOCAL'
+
+      Can be one of:
+
+      * UNSPEC - an unspecified address
+      * UNICAST - a unicast address
+      * LOCAL - a local address
+      * BROADCAST - a broadcast address
+      * ANYCAST - an anycast packet
+      * MULTICAST - a multicast address
+      * BLACKHOLE - a blackhole address
+      * UNREACHABLE - an unreachable address
+      * PROHIBIT - a prohibited address
+      * THROW - undocumented
+      * NAT - undocumented
+      * XRESOLVE - undocumented
+    EOS
+
+    newvalues(:UNSPEC, :UNICAST, :LOCAL, :BROADCAST, :ANYCAST, :MULTICAST,
+              :BLACKHOLE, :UNREACHABLE, :PROHIBIT, :THROW, :NAT, :XRESOLVE)
+  end
+
+  newproperty(:src_type, :required_features => :address_type) do
+    desc <<-EOS
+      The source address type. For example:
+
+          src_type => 'LOCAL'
+
+      Can be one of:
+
+      * UNSPEC - an unspecified address
+      * UNICAST - a unicast address
+      * LOCAL - a local address
+      * BROADCAST - a broadcast address
+      * ANYCAST - an anycast packet
+      * MULTICAST - a multicast address
+      * BLACKHOLE - a blackhole address
+      * UNREACHABLE - an unreachable address
+      * PROHIBIT - a prohibited address
+      * THROW - undocumented
+      * NAT - undocumented
+      * XRESOLVE - undocumented
+    EOS
+
+    newvalues(:UNSPEC, :UNICAST, :LOCAL, :BROADCAST, :ANYCAST, :MULTICAST,
+              :BLACKHOLE, :UNREACHABLE, :PROHIBIT, :THROW, :NAT, :XRESOLVE)
+  end
+
+  newproperty(:proto) do
+    desc <<-EOS
+      The specific protocol to match for this rule. By default this is
+      *tcp*.
+    EOS
+
+    newvalues(*[:tcp, :udp, :icmp, :"ipv6-icmp", :esp, :ah, :vrrp, :igmp, :ipencap, :ipv4, :ipv6, :ospf, :gre, :cbt, :all].collect do |proto|
+      [proto, "! #{proto}".to_sym]
+    end.flatten)
+    defaultto "tcp"
+  end
+  
+  # tcp-specific
+  newproperty(:mss) do
+    desc <<-EOS
+      Match a given TCP MSS value or range.
+    EOS
+  end
+
+  # tcp-specific
+  newproperty(:tcp_flags, :required_features => :tcp_flags) do
+    desc <<-EOS
+      Match when the TCP flags are as specified.
+      Is a string with a list of comma-separated flag names for the mask,
+      then a space, then a comma-separated list of flags that should be set.
+      The flags are: SYN ACK FIN RST URG PSH ALL NONE
+      Note that you specify them in the order that iptables --list-rules
+      would list them to avoid having puppet think you changed the flags.
+      Example: FIN,SYN,RST,ACK SYN matches packets with the SYN bit set and the
+	       ACK,RST and FIN bits cleared.  Such packets are used to request
+               TCP  connection initiation.
+    EOS
+  end
+
+
+  # Iptables specific
+  newproperty(:chain, :required_features => :iptables) do
+    desc <<-EOS
+      Name of the chain to use. Can be one of the built-ins:
+
+      * INPUT
+      * FORWARD
+      * OUTPUT
+      * PREROUTING
+      * POSTROUTING
+
+      Or you can provide a user-based chain.
+
+      The default value is 'INPUT'.
+    EOS
+
+    defaultto "INPUT"
+    newvalue(/^[a-zA-Z0-9\-_]+$/)
+  end
+
+  newproperty(:table, :required_features => :iptables) do
+    desc <<-EOS
+      Table to use. Can be one of:
+
+      * nat
+      * mangle
+      * filter
+      * raw
+      * rawpost
+
+      By default the setting is 'filter'.
+    EOS
+
+    newvalues(:nat, :mangle, :filter, :raw, :rawpost)
+    defaultto "filter"
+  end
+
+  newproperty(:jump, :required_features => :iptables) do
+    desc <<-EOS
+      The value for the iptables --jump parameter. Normal values are:
+
+      * QUEUE
+      * RETURN
+      * DNAT
+      * SNAT
+      * LOG
+      * MASQUERADE
+      * REDIRECT
+      * MARK
+
+      But any valid chain name is allowed.
+
+      For the values ACCEPT, DROP and REJECT you must use the generic
+      'action' parameter. This is to enfore the use of generic parameters where
+      possible for maximum cross-platform modelling.
+
+      If you set both 'accept' and 'jump' parameters, you will get an error as
+      only one of the options should be set.
+    EOS
+
+    validate do |value|
+      unless value =~ /^[a-zA-Z0-9\-_]+$/
+        raise ArgumentError, <<-EOS
+          Jump destination must consist of alphanumeric characters, an
+          underscore or a yphen.
+        EOS
+      end
+
+      if ["accept","reject","drop"].include?(value.downcase)
+        raise ArgumentError, <<-EOS
+          Jump destination should not be one of ACCEPT, REJECT or DROP. Use
+          the action property instead.
+        EOS
+      end
+
+    end
+  end
+
+  # Interface specific matching properties
+  newproperty(:iniface, :required_features => :interface_match) do
+    desc <<-EOS
+      Input interface to filter on.  Supports interface alias like eth0:0.
+      To negate the match try this:
+
+            iniface => '! lo',
+
+    EOS
+    newvalues(/^!?\s?[a-zA-Z0-9\-\._\+\:]+$/)
+  end
+
+  newproperty(:outiface, :required_features => :interface_match) do
+    desc <<-EOS
+      Output interface to filter on.  Supports interface alias like eth0:0.
+     To negate the match try this:
+
+           outiface => '! lo',
+
+    EOS
+    newvalues(/^!?\s?[a-zA-Z0-9\-\._\+\:]+$/)
+  end
+
+  # NAT specific properties
+  newproperty(:tosource, :required_features => :snat) do
+    desc <<-EOS
+      When using jump => "SNAT" you can specify the new source address using
+      this parameter.
+    EOS
+  end
+
+  newproperty(:todest, :required_features => :dnat) do
+    desc <<-EOS
+      When using jump => "DNAT" you can specify the new destination address
+      using this paramter.
+    EOS
+  end
+
+  newproperty(:toports, :required_features => :dnat) do
+    desc <<-EOS
+      For DNAT this is the port that will replace the destination port.
+    EOS
+  end
+
+  newproperty(:to, :required_features => :netmap) do
+    desc <<-EOS
+      For NETMAP this will replace the destination IP
+    EOS
+  end
+
+  newproperty(:random, :required_features => :dnat) do
+    desc <<-EOS
+      When using a jump value of "MASQUERADE", "DNAT", "REDIRECT", or "SNAT"
+      this boolean will enable randomized port mapping.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  # Reject ICMP type
+  newproperty(:reject, :required_features => :reject_type) do
+    desc <<-EOS
+      When combined with jump => "REJECT" you can specify a different icmp
+      response to be sent back to the packet sender.
+    EOS
+  end
+
+  # Logging properties
+  newproperty(:log_level, :required_features => :log_level) do
+    desc <<-EOS
+      When combined with jump => "LOG" specifies the system log level to log
+      to.
+    EOS
+
+    munge do |value|
+      if value.kind_of?(String)
+        value = @resource.log_level_name_to_number(value)
+      else
+        value
+      end
+
+      if value == nil && value != ""
+        self.fail("Unable to determine log level")
+      end
+      value
+    end
+  end
+
+  newproperty(:log_prefix, :required_features => :log_prefix) do
+    desc <<-EOS
+      When combined with jump => "LOG" specifies the log prefix to use when
+      logging.
+    EOS
+  end
+
+  # ICMP matching property
+  newproperty(:icmp, :required_features => :icmp_match) do
+    desc <<-EOS
+      When matching ICMP packets, this is the type of ICMP packet to match.
+
+      A value of "any" is not supported. To achieve this behaviour the
+      parameter should simply be omitted or undefined.
+    EOS
+
+    validate do |value|
+      if value == "any"
+        raise ArgumentError,
+          "Value 'any' is not valid. This behaviour should be achieved " \
+          "by omitting or undefining the ICMP parameter."
+      end
+    end
+
+    munge do |value|
+      if value.kind_of?(String)
+        # ICMP codes differ between IPv4 and IPv6.
+        case @resource[:provider]
+        when :iptables
+          protocol = 'inet'
+        when :ip6tables
+          protocol = 'inet6'
+        else
+          self.fail("cannot work out protocol family")
+        end
+
+        value = @resource.icmp_name_to_number(value, protocol)
+      else
+        value
+      end
+
+      if value == nil && value != ""
+        self.fail("cannot work out icmp type")
+      end
+      value
+    end
+  end
+
+  newproperty(:state, :array_matching => :all, :required_features =>
+    :state_match) do
+
+    desc <<-EOS
+      Matches a packet based on its state in the firewall stateful inspection
+      table. Values can be:
+
+      * INVALID
+      * ESTABLISHED
+      * NEW
+      * RELATED
+    EOS
+
+    newvalues(:INVALID,:ESTABLISHED,:NEW,:RELATED)
+
+    # States should always be sorted. This normalizes the resource states to
+    # keep it consistent with the sorted result from iptables-save.
+    def should=(values)
+      @should = super(values).sort_by {|sym| sym.to_s}
+    end
+
+    def is_to_s(value)
+      should_to_s(value)
+    end
+
+    def should_to_s(value)
+      value = [value] unless value.is_a?(Array)
+      value.join(',')
+    end
+  end
+
+  newproperty(:ctstate, :array_matching => :all, :required_features =>
+    :state_match) do
+
+    desc <<-EOS
+      Matches a packet based on its state in the firewall stateful inspection
+      table, using the conntrack module. Values can be:
+
+      * INVALID
+      * ESTABLISHED
+      * NEW
+      * RELATED
+    EOS
+
+    newvalues(:INVALID,:ESTABLISHED,:NEW,:RELATED)
+
+    # States should always be sorted. This normalizes the resource states to
+    # keep it consistent with the sorted result from iptables-save.
+    def should=(values)
+      @should = super(values).sort_by {|sym| sym.to_s}
+    end
+
+    def is_to_s(value)
+      should_to_s(value)
+    end
+
+    def should_to_s(value)
+      value = [value] unless value.is_a?(Array)
+      value.join(',')
+    end
+  end
+
+
+  # Connection mark
+  newproperty(:connmark, :required_features => :mark) do
+    desc <<-EOS
+      Match the Netfilter mark value associated with the packet.  Accepts either of:
+      mark/mask or mark.  These will be converted to hex if they are not already.
+    EOS
+    munge do |value|
+      int_or_hex = '[a-fA-F0-9x]'
+      match = value.to_s.match("(#{int_or_hex}+)(/)?(#{int_or_hex}+)?")
+      mark = @resource.to_hex32(match[1])
+
+      # Values that can't be converted to hex.
+      # Or contain a trailing slash with no mask.
+      if mark.nil? or (mark and match[2] and match[3].nil?)
+        raise ArgumentError, "MARK value must be integer or hex between 0 and 0xffffffff"
+      end
+
+      # There should not be a mask on connmark
+      unless match[3].nil?
+        raise ArgumentError, "iptables does not support masks on MARK match rules"
+      end
+      value = mark
+
+      value
+    end
+  end
+
+  # Connection limiting properties
+  newproperty(:connlimit_above, :required_features => :connection_limiting) do
+    desc <<-EOS
+      Connection limiting value for matched connections above n.
+    EOS
+    newvalue(/^\d+$/)
+  end
+
+  newproperty(:connlimit_mask, :required_features => :connection_limiting) do
+    desc <<-EOS
+      Connection limiting by subnet mask for matched connections.
+      IPv4: 0-32
+      IPv6: 0-128
+    EOS
+    newvalue(/^\d+$/)
+  end
+
+  # Hop limiting properties
+  newproperty(:hop_limit, :required_features => :hop_limiting) do
+    desc <<-EOS
+      Hop limiting value for matched packets.
+    EOS
+    newvalue(/^\d+$/)
+  end
+
+  # Rate limiting properties
+  newproperty(:limit, :required_features => :rate_limiting) do
+    desc <<-EOS
+      Rate limiting value for matched packets. The format is:
+      rate/[/second/|/minute|/hour|/day].
+
+      Example values are: '50/sec', '40/min', '30/hour', '10/day'."
+    EOS
+  end
+
+  newproperty(:burst, :required_features => :rate_limiting) do
+    desc <<-EOS
+      Rate limiting burst value (per second) before limit checks apply.
+    EOS
+    newvalue(/^\d+$/)
+  end
+
+  newproperty(:uid, :required_features => :owner) do
+    desc <<-EOS
+      UID or Username owner matching rule.  Accepts a string argument
+      only, as iptables does not accept multiple uid in a single
+      statement.
+    EOS
+    def insync?(is)
+      require 'etc'
+
+      # The following code allow us to take into consideration unix mappings
+      # between string usernames and UIDs (integers). We also need to ignore
+      # spaces as they are irrelevant with respect to rule sync.
+
+      # Remove whitespace
+      is = is.gsub(/\s+/,'')
+      should = @should.first.to_s.gsub(/\s+/,'')
+
+      # Keep track of negation, but remove the '!'
+      is_negate = ''
+      should_negate = ''
+      if is.start_with?('!')
+        is = is.gsub(/^!/,'')
+        is_negate = '!'
+      end
+      if should.start_with?('!')
+        should = should.gsub(/^!/,'')
+        should_negate = '!'
+      end
+
+      # If 'should' contains anything other than digits,
+      # we assume that we have to do a lookup to convert
+      # to UID
+      unless should[/[0-9]+/] == should
+        should = Etc.getpwnam(should).uid
+      end
+
+      # If 'is' contains anything other than digits,
+      # we assume that we have to do a lookup to convert
+      # to UID
+      unless is[/[0-9]+/] == is
+        is = Etc.getpwnam(is).uid
+      end
+
+      return "#{is_negate}#{is}" == "#{should_negate}#{should}"
+    end
+
+  end
+
+  newproperty(:gid, :required_features => :owner) do
+    desc <<-EOS
+      GID or Group owner matching rule.  Accepts a string argument
+      only, as iptables does not accept multiple gid in a single
+      statement.
+    EOS
+  end
+
+  # match mark
+  newproperty(:match_mark, :required_features => :mark) do
+    desc <<-EOS
+      Match the Netfilter mark value associated with the packet.  Accepts either of:
+      mark/mask or mark.  These will be converted to hex if they are not already.
+    EOS
+    munge do |value|
+      mark_regex = %r{\A((?:0x)?[0-9A-F]+)(/)?((?:0x)?[0-9A-F]+)?\z}i
+      match = value.to_s.match(mark_regex)
+      if match.nil?
+        raise ArgumentError, "Match MARK value must be integer or hex between 0 and 0xffffffff"
+      end
+      mark = @resource.to_hex32(match[1])
+
+      # Values that can't be converted to hex.
+      # Or contain a trailing slash with no mask.
+      if mark.nil? or (mark and match[2] and match[3].nil?)
+        raise ArgumentError, "Match MARK value must be integer or hex between 0 and 0xffffffff"
+      end
+
+      # There should not be a mask on match_mark
+      unless match[3].nil?
+        raise ArgumentError, "iptables does not support masks on MARK match rules"
+      end
+      value = mark
+
+      value
+    end
+  end
+
+  newproperty(:set_mark, :required_features => :mark) do
+    desc <<-EOS
+      Set the Netfilter mark value associated with the packet.  Accepts either of:
+      mark/mask or mark.  These will be converted to hex if they are not already.
+    EOS
+
+    munge do |value|
+      int_or_hex = '[a-fA-F0-9x]'
+      match = value.to_s.match("(#{int_or_hex}+)(/)?(#{int_or_hex}+)?")
+      mark = @resource.to_hex32(match[1])
+
+      # Values that can't be converted to hex.
+      # Or contain a trailing slash with no mask.
+      if mark.nil? or (mark and match[2] and match[3].nil?)
+        raise ArgumentError, "MARK value must be integer or hex between 0 and 0xffffffff"
+      end
+
+      # Old iptables does not support a mask. New iptables will expect one.
+      iptables_version = Facter.fact('iptables_version').value
+      mask_required = (iptables_version and Puppet::Util::Package.versioncmp(iptables_version, '1.4.1') >= 0)
+
+      if mask_required
+        if match[3].nil?
+          value = "#{mark}/0xffffffff"
+        else
+          mask = @resource.to_hex32(match[3])
+          if mask.nil?
+            raise ArgumentError, "MARK mask must be integer or hex between 0 and 0xffffffff"
+          end
+          value = "#{mark}/#{mask}"
+        end
+      else
+        unless match[3].nil?
+          raise ArgumentError, "iptables version #{iptables_version} does not support masks on MARK rules"
+        end
+        value = mark
+      end
+
+      value
+    end
+  end
+
+  newproperty(:clamp_mss_to_pmtu, :required_features => :iptables) do
+    desc <<-EOS
+      Sets the clamp mss to pmtu flag.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:set_mss, :required_features => :iptables) do
+    desc <<-EOS
+      Sets the TCP MSS value for packets.
+    EOS
+  end
+
+  newproperty(:pkttype, :required_features => :pkttype) do
+    desc <<-EOS
+      Sets the packet type to match.
+    EOS
+
+    newvalues(:unicast, :broadcast, :multicast)
+  end
+
+  newproperty(:isfragment, :required_features => :isfragment) do
+    desc <<-EOS
+      Set to true to match tcp fragments (requires type to be set to tcp)
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:recent, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Enable the recent module. Takes as an argument one of set, update,
+      rcheck or remove. For example:
+
+        # If anyone's appeared on the 'badguy' blacklist within
+        # the last 60 seconds, drop their traffic, and update the timestamp.
+        firewall { '100 Drop badguy traffic':
+          recent   => 'update',
+          rseconds => 60,
+          rsource  => true,
+          rname    => 'badguy',
+          action   => 'DROP',
+          chain    => 'FORWARD',
+        }
+        # No-one should be sending us traffic on eth0 from localhost
+        # Blacklist them
+        firewall { '101 blacklist strange traffic':
+          recent      => 'set',
+          rsource     => true,
+          rname       => 'badguy',
+          destination => '127.0.0.0/8',
+          iniface     => 'eth0',
+          action      => 'DROP',
+          chain       => 'FORWARD',
+        }
+    EOS
+
+    newvalues(:set, :update, :rcheck, :remove)
+    munge do |value|
+       value = "--" + value
+    end
+  end
+
+  newproperty(:rdest, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; add the destination IP address to the list.
+      Must be boolean true.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:rsource, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; add the source IP address to the list.
+      Must be boolean true.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:rname, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; The name of the list. Takes a string argument.
+    EOS
+  end
+
+  newproperty(:rseconds, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; used in conjunction with one of `recent => 'rcheck'` or
+      `recent => 'update'`. When used, this will narrow the match to only
+      happen when the address is in the list and was seen within the last given
+      number of seconds.
+    EOS
+  end
+
+  newproperty(:reap, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; can only be used in conjunction with the `rseconds`
+      attribute. When used, this will cause entries older than 'seconds' to be
+      purged.  Must be boolean true.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:rhitcount, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; used in conjunction with `recent => 'update'` or `recent
+      => 'rcheck'. When used, this will narrow the match to only happen when
+      the address is in the list and packets had been received greater than or
+      equal to the given value.
+    EOS
+  end
+
+  newproperty(:rttl, :required_features => :recent_limiting) do
+    desc <<-EOS
+      Recent module; may only be used in conjunction with one of `recent =>
+      'rcheck'` or `recent => 'update'`. When used, this will narrow the match
+      to only happen when the address is in the list and the TTL of the current
+      packet matches that of the packet which hit the `recent => 'set'` rule.
+      This may be useful if you have problems with people faking their source
+      address in order to DoS you via this module by disallowing others access
+      to your site by sending bogus packets to you.  Must be boolean true.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:socket, :required_features => :socket) do
+    desc <<-EOS
+      If true, matches if an open socket can be found by doing a coket lookup
+      on the packet.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:ishasmorefrags, :required_features => :ishasmorefrags) do
+    desc <<-EOS
+      If true, matches if the packet has it's 'more fragments' bit set. ipv6.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:islastfrag, :required_features => :islastfrag) do
+    desc <<-EOS
+      If true, matches if the packet is the last fragment. ipv6.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:isfirstfrag, :required_features => :isfirstfrag) do
+    desc <<-EOS
+      If true, matches if the packet is the first fragment.
+      Sadly cannot be negated. ipv6.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:ipsec_policy, :required_features => :ipsec_policy) do
+    desc <<-EOS
+       Sets the ipsec policy type. May take a combination of arguments for any flags that can be passed to `--pol ipsec` such as: `--strict`, `--reqid 100`, `--next`, `--proto esp`, etc.
+    EOS
+
+    newvalues(:none, :ipsec)
+  end
+
+  newproperty(:ipsec_dir, :required_features => :ipsec_dir) do
+    desc <<-EOS
+       Sets the ipsec policy direction
+    EOS
+
+    newvalues(:in, :out)
+  end
+
+  newproperty(:stat_mode) do
+    desc <<-EOS
+      Set the matching mode for statistic matching. Supported modes are `random` and `nth`.
+    EOS
+
+    newvalues(:nth, :random)
+  end
+
+  newproperty(:stat_every) do
+    desc <<-EOS
+      Match one packet every nth packet. Requires `stat_mode => 'nth'`
+    EOS
+
+    validate do |value|
+      unless value =~ /^\d+$/
+        raise ArgumentError, <<-EOS
+          stat_every value must be a digit
+        EOS
+      end
+
+      unless value.to_i > 0
+        raise ArgumentError, <<-EOS
+          stat_every value must be larger than 0
+        EOS
+      end
+    end
+  end
+
+  newproperty(:stat_packet) do
+    desc <<-EOS
+      Set the initial counter value for the nth mode. Must be between 0 and the value of `stat_every`. Defaults to 0. Requires `stat_mode => 'nth'`
+    EOS
+
+    newvalues(/^\d+$/)
+  end
+
+  newproperty(:stat_probability) do
+    desc <<-EOS
+      Set the probability from 0 to 1 for a packet to be randomly matched. It works only with `stat_mode => 'random'`.
+    EOS
+
+    validate do |value|
+      unless value =~ /^([01])\.(\d+)$/
+        raise ArgumentError, <<-EOS
+          stat_probability must be between 0.0 and 1.0
+        EOS
+      end
+
+      if $1.to_i == 1 && $2.to_i != 0
+        raise ArgumentError, <<-EOS
+          start_probability must be between 0.0 and 1.0
+        EOS
+      end
+    end
+  end
+
+  newproperty(:mask, :required_features => :mask) do
+    desc <<-EOS
+      Sets the mask to use when `recent` is enabled.
+    EOS
+  end
+
+  newproperty(:gateway, :required_features => :iptables) do
+    desc <<-EOS
+      The TEE target will clone a packet and redirect this clone to another
+      machine on the local network segment. gateway is the target host's IP.
+    EOS
+  end
+
+  newproperty(:ipset, :required_features => :ipset) do
+    desc <<-EOS
+      Matches against the specified ipset list.
+      Requires ipset kernel module.
+      The value is the name of the blacklist, followed by a space, and then
+      'src' and/or 'dst' separated by a comma.
+      For example: 'blacklist src,dst'
+    EOS
+  end
+
+  newproperty(:checksum_fill, :required_features => :iptables) do
+    desc <<-EOS
+      Compute and fill missing packet checksums.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newparam(:line) do
+    desc <<-EOS
+      Read-only property for caching the rule line.
+    EOS
+  end
+
+  newproperty(:mac_source) do
+    desc <<-EOS
+      MAC Source
+    EOS
+    newvalues(/^([0-9a-f]{2}[:]){5}([0-9a-f]{2})$/i)
+  end
+
+  newproperty(:physdev_in, :required_features => :iptables) do
+    desc <<-EOS
+      Match if the packet is entering a bridge from the given interface.
+    EOS
+    newvalues(/^[a-zA-Z0-9\-\._\+]+$/)
+  end
+
+  newproperty(:physdev_out, :required_features => :iptables) do
+    desc <<-EOS
+      Match if the packet is leaving a bridge via the given interface.
+    EOS
+    newvalues(/^[a-zA-Z0-9\-\._\+]+$/)
+  end
+
+  newproperty(:physdev_is_bridged, :required_features => :iptables) do
+    desc <<-EOS
+      Match if the packet is transversing a bridge.
+    EOS
+    newvalues(:true, :false)
+  end
+
+  newproperty(:date_start, :required_features => :iptables) do
+    desc <<-EOS
+      Only match during the given time, which must be in ISO 8601 "T" notation.
+      The possible time range is 1970-01-01T00:00:00 to 2038-01-19T04:17:07
+    EOS
+  end
+
+  newproperty(:date_stop, :required_features => :iptables) do
+    desc <<-EOS
+      Only match during the given time, which must be in ISO 8601 "T" notation.
+      The possible time range is 1970-01-01T00:00:00 to 2038-01-19T04:17:07
+    EOS
+  end
+
+  newproperty(:time_start, :required_features => :iptables) do
+    desc <<-EOS
+      Only match during the given daytime. The possible time range is 00:00:00 to 23:59:59.
+      Leading zeroes are allowed (e.g. "06:03") and correctly interpreted as base-10.
+    EOS
+
+    munge do |value|
+      if value =~ /^([0-9]):/
+        value = "0#{value}"
+      end
+
+      if value =~ /^([0-9]|0[0-9]|1[0-9]|2[0-3]):[0-5][0-9]$/
+        value = "#{value}:00"
+      end
+
+      value
+    end
+  end
+
+  newproperty(:time_stop, :required_features => :iptables) do
+    desc <<-EOS
+      Only match during the given daytime. The possible time range is 00:00:00 to 23:59:59.
+      Leading zeroes are allowed (e.g. "06:03") and correctly interpreted as base-10.
+    EOS
+
+    munge do |value|
+      if value =~ /^([0-9]):/
+        value = "0#{value}"
+      end
+
+      if value =~ /^([0-9]|0[0-9]|1[0-9]|2[0-3]):[0-5][0-9]$/
+        value = "#{value}:00"
+      end
+
+      value
+    end
+  end
+
+  newproperty(:month_days, :required_features => :iptables) do
+    desc <<-EOS
+      Only match on the given days of the month. Possible values are 1 to 31.
+      Note that specifying 31 will of course not match on months which do not have a 31st day;
+      the same goes for 28- or 29-day February.
+    EOS
+
+    validate do |value|
+      month = value.to_i
+      if month >= 1 and month <=31
+        value
+      else
+        raise ArgumentError,
+          "month_days must be in the range of 1-31"
+      end
+    end
+  end
+
+  newproperty(:week_days, :required_features => :iptables) do
+    desc <<-EOS
+      Only match on the given weekdays. Possible values are Mon, Tue, Wed, Thu, Fri, Sat, Sun.
+    EOS
+
+    newvalues(:Mon, :Tue, :Wed, :Thu, :Fri, :Sat, :Sun)
+  end
+
+  newproperty(:time_contiguous, :required_features => :iptables) do
+    desc <<-EOS
+      When time_stop is smaller than time_start value, match this as a single time period instead distinct intervals.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+  newproperty(:kernel_timezone, :required_features => :iptables) do
+    desc <<-EOS
+      Use the kernel timezone instead of UTC to determine whether a packet meets the time regulations.
+    EOS
+
+    newvalues(:true, :false)
+  end
+
+
+  autorequire(:firewallchain) do
+    reqs = []
+    protocol = nil
+
+    case value(:provider)
+    when :iptables
+      protocol = "IPv4"
+    when :ip6tables
+      protocol = "IPv6"
+    end
+
+    unless protocol.nil?
+      table = value(:table)
+      [value(:chain), value(:jump)].each do |chain|
+        reqs << "#{chain}:#{table}:#{protocol}" unless ( chain.nil? || (['INPUT', 'OUTPUT', 'FORWARD'].include?(chain) && table == :filter) )
+      end
+    end
+
+    reqs
+  end
+
+  # Classes would be a better abstraction, pending:
+  # http://projects.puppetlabs.com/issues/19001
+  autorequire(:package) do
+    case value(:provider)
+    when :iptables, :ip6tables
+      %w{iptables iptables-persistent netfilter-persistent iptables-services}
+    else
+      []
+    end
+  end
+
+  validate do
+    debug("[validate]")
+
+    # TODO: this is put here to skip validation if ensure is not set. This
+    # is because there is a revalidation stage called later where the values
+    # are not set correctly. I tried tracing it - but have put in this
+    # workaround instead to skip. Must get to the bottom of this.
+    if ! value(:ensure)
+      return
+    end
+
+    # First we make sure the chains and tables are valid combinations
+    if value(:table).to_s == "filter" &&
+      value(:chain) =~ /PREROUTING|POSTROUTING/
+
+      self.fail "PREROUTING and POSTROUTING cannot be used in table 'filter'"
+    end
+
+    if value(:table).to_s == "nat" && value(:chain) =~ /INPUT|FORWARD/
+      self.fail "INPUT and FORWARD cannot be used in table 'nat'"
+    end
+
+    if value(:table).to_s == "raw" &&
+      value(:chain) =~ /INPUT|FORWARD|POSTROUTING/
+
+      self.fail "INPUT, FORWARD and POSTROUTING cannot be used in table raw"
+    end
+
+    # Now we analyse the individual properties to make sure they apply to
+    # the correct combinations.
+    if value(:uid)
+      unless value(:chain).to_s =~ /OUTPUT|POSTROUTING/
+        self.fail "Parameter uid only applies to chains " \
+          "OUTPUT,POSTROUTING"
+      end
+    end
+
+    if value(:gid)
+      unless value(:chain).to_s =~ /OUTPUT|POSTROUTING/
+        self.fail "Parameter gid only applies to chains " \
+          "OUTPUT,POSTROUTING"
+      end
+    end
+
+    if value(:set_mark)
+      unless value(:jump).to_s  =~ /MARK/ &&
+             value(:table).to_s =~ /mangle/
+        self.fail "Parameter set_mark only applies to " \
+          "the mangle table and when jump => MARK"
+      end
+    end
+
+    if value(:dport)
+      unless value(:proto).to_s =~ /tcp|udp|sctp/
+        self.fail "[%s] Parameter dport only applies to sctp, tcp and udp " \
+          "protocols. Current protocol is [%s] and dport is [%s]" %
+          [value(:name), should(:proto), should(:dport)]
+      end
+    end
+
+    if value(:jump).to_s == "TCPMSS"
+      unless value(:set_mss) || value(:clamp_mss_to_pmtu)
+        self.fail "When using jump => TCPMSS, the set_mss or clamp_mss_to_pmtu property is required"
+      end
+    end
+
+    if value(:jump).to_s == "TEE"
+      unless value(:gateway)
+        self.fail "When using jump => TEE, the gateway property is required"
+      end
+    end
+
+    if value(:jump).to_s == "DNAT"
+      unless value(:table).to_s =~ /nat/
+        self.fail "Parameter jump => DNAT only applies to table => nat"
+      end
+
+      unless value(:todest)
+        self.fail "Parameter jump => DNAT must have todest parameter"
+      end
+    end
+
+    if value(:jump).to_s == "SNAT"
+      unless value(:table).to_s =~ /nat/
+        self.fail "Parameter jump => SNAT only applies to table => nat"
+      end
+
+      unless value(:tosource)
+        self.fail "Parameter jump => SNAT must have tosource parameter"
+      end
+    end
+
+    if value(:jump).to_s == "MASQUERADE"
+      unless value(:table).to_s =~ /nat/
+        self.fail "Parameter jump => MASQUERADE only applies to table => nat"
+      end
+    end
+
+    if value(:log_prefix) || value(:log_level)
+      unless value(:jump).to_s == "LOG"
+        self.fail "Parameter log_prefix and log_level require jump => LOG"
+      end
+    end
+
+    if value(:burst) && ! value(:limit)
+      self.fail "burst makes no sense without limit"
+    end
+
+    if value(:action) && value(:jump)
+      self.fail "Only one of the parameters 'action' and 'jump' can be set"
+    end
+
+    if value(:connlimit_mask) && ! value(:connlimit_above)
+      self.fail "Parameter 'connlimit_mask' requires 'connlimit_above'"
+    end
+
+    if value(:mask) && ! value(:recent)
+      self.fail "Mask can only be set if recent is enabled."
+    end
+
+    [:stat_packet, :stat_every, :stat_probability].each do |param|
+      if value(param) && ! value(:stat_mode)
+        self.fail "Parameter '#{param.to_s}' requires 'stat_mode' to be set"
+      end
+    end
+
+    if value(:stat_packet) && value(:stat_mode) != :nth
+      self.fail "Parameter 'stat_packet' requires 'stat_mode' to be set to 'nth'"
+    end
+
+    if value(:stat_every) && value(:stat_mode) != :nth
+      self.fail "Parameter 'stat_every' requires 'stat_mode' to be set to 'nth'"
+    end
+
+    if value(:stat_probability) && value(:stat_mode) != :random
+      self.fail "Parameter 'stat_probability' requires 'stat_mode' to be set to 'random'"
+    end
+
+    if value(:checksum_fill)
+      unless value(:jump).to_s == "CHECKSUM" && value(:table).to_s == "mangle"
+        self.fail "Parameter checksum_fill requires jump => CHECKSUM and table => mangle"
+      end
+    end
+
+  end
+end